KPlunge CP-CH6732N Iroquois 67" 1-Person All-in-One Cold Plunge and Hot Tub with Built-in Chiller in Chestnut
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Authorized dealer for 12+ brands · Real people on the phone, Mon to Fri
Shop NowRecent
Popular searches
Recent
Popular searches
+1 (307) 429-4122
support@mycleansupplies.com
Mon-Fri: 9am - 5pm (EST)
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The KPlunge CP-CH6732N Iroquois is a 1-person all-in-one cold plunge and hot tub with the chiller and heater built into the cabinet, finished in white acrylic with a chestnut surround on a stainless steel frame. It holds 84 gallons, measures 66.9" L x 32.7" W x 33.5" H, and plugs into a 120V outlet, so a buyer gets a cold plunge at 37°F or a warm soak at 104°F without a separate chiller, hoses or ice.
Cold Plunge and Hot Tub in One Cabinet
SaunaSpa lists the built-in unit as a 1 HP chiller. A single circulating jet keeps the water moving around you, which makes a cold plunge feel colder, and soft color mood lighting turns an early morning reset or an evening soak into a calm routine. You set the temperature from the touch panel on the tub or from the Gizwits Smart app over 2.4 GHz WiFi, and switch the light on or off from the same panel.
Because the chiller and heater share one cabinet, switching from a morning cold plunge at 37°F to an evening soak at 104°F is a matter of changing the set point rather than moving equipment. SaunaSpa recommends keeping cold plunge sessions to no more than ten minutes and testing the water with an accurate thermometer before you get in, since temperature controls can read up to 5°F off; the warm setting tops out at 104°F.
Water Care Built In
Water care is built in: an ozone generator and a pleated, replaceable filter cartridge keep the water clean and clear, and the filter sits behind the right side skirt door with shut-off ball valves for quick cleaning. A condensation line drains from the side of the base, and the cabinet rated for 14°F to 122°F ambient lets the tub live in a garage, on a patio or in a home gym. Clean the cartridge at least once a month and plan on fresh water about every 2 months, sooner when the water will not stay clear.
Sizing, Power and Placement
At 66.9" x 32.7" x 33.5", the Iroquois fits a patio, a garage or a home gym. It runs on 120V AC, 60Hz at 12 amps (1000 W) through its supplied 10 ft GFCI cord, which must plug into a GFCI-protected circuit with no extension cord, and SaunaSpa calls for a qualified electrician to install that circuit. Plan a smooth, level base, 3 ft of clearance around the cabinet for service and airflow, and a drain path for the condensation line.
The white acrylic shell with its chestnut finish sits on a stainless steel frame behind removable corner panels and skirt doors, which come off for access to the pump, filter and junction box. Wheels, a thick cover and quick-connect hoses come with the tub.
In the KPlunge range the Iroquois is the compact all-in-one with a single jet, while the Borealis (CP-CH7939) adds a second jet, Bluetooth speakers and a longer 78.7" shell; SaunaSpa also pairs the Iroquois with its outdoor barrel saunas in the AZOTBL3-6732N and AZOTBL4-6732N sets. For a self-contained hot and cold plunge on a 120V GFCI-protected circuit, the KPlunge CP-CH6732N Iroquois puts the chiller, heater and filtration in one tub.
Cold Plunge and Hot Soak in One
The built-in chiller and heater hold the water anywhere from 37°F to 104°F, so one 84-gallon tub covers an ice-cold plunge and a warm evening soak.
Plugs Into 120V Power
It draws 1000 W at 120V, 60Hz and 12 amps through a 10 ft GFCI cord, on a GFCI-protected circuit with a breaker at the main panel, installed by a qualified electrician, and never an extension cord.
Circulating Jet
A single jet keeps the water moving around your body during a session, which makes a cold plunge feel colder than still water at the same temperature.
Touch Panel and WiFi App
Set the target temperature and lighting from the touch panel on the tub, or from the Gizwits Smart app on a 2.4 GHz network, so the water is ready when you arrive.
Ozone and Replaceable Filter
An ozone generator and a pleated filter cartridge keep the water clean and odor free, and ball valves behind the side skirt let you clean the filter without draining.
Acrylic Tub on a Steel Frame
The white acrylic tub with a chestnut finish sits on a stainless steel frame, sized at 66.9" x 32.7" x 33.5" for a patio, garage or home gym.
Color Mood Lighting
Soft ambient color lighting gives the water a calm glow for evening soaks and early sessions, switched from its own button on the control panel.
Wheels, Cover and Quick Connects
Wheels, a thick insulated cover and quick-connect hoses come with the tub, so it is simple to roll into place and to keep the water at temperature.
Installation
Place the plunge on a smooth, flat, level base that can carry the weight of the tub, water and bather without shims, with at least 3 ft of clearance on all sides for service and airflow; avoid direct sun, unguttered roof edges and spots where the expelled air recirculates. Indoors, plan ventilation for moisture and a floor that drains, and route the condensation line to a drain. It runs only on its supplied 120V GFCI cord at its original length, never an extension cord, into a GFCI-protected circuit with a breaker at the main panel installed by a qualified electrician; metal surfaces within 5 ft must be bonded with 10 AWG solid copper. To reach the equipment bay, two people remove the corner panels and lift off the skirt doors.
Care
Clean the pleated filter cartridge at least once a month (unplug, remove the right side skirt door, close the ball valves, unscrew the filter). Change the water about every 2 months, or sooner when it will not stay clear. Keep the acrylic glossy with non-abrasive cleaners and rinse away all soap so it does not foam on refill. In freezing weather keep the power on and set a warmer temperature; for a long shutdown drain the tub and the heat pump completely.
KPlunge ships this item from the SW Corp warehouse by LTL freight with curbside delivery: the carrier contacts you to schedule the delivery, and you move the item from the curb to its final spot. Orders usually leave the warehouse within 1 to 2 business days, and you'll get tracking by email as soon as it ships. Shipping is free within the lower 48 states; for Alaska or Hawaii, contact us before you order.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused KPlunge products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
SaunaSpa warrants this cold plunge against defects in materials and workmanship under normal use for 1 year from the original date of purchase. Register it at saunaspa.com/register within 90 days of delivery; the warranty is void without registration. Follow all installation and operating instructions, use the product only as intended and keep your proof of purchase. Improper installation, misuse, abuse or neglect, unauthorized repairs or modifications, and failure to follow the maintenance instructions are not covered.
Warranty claims. Call SW Corp, the maker of KPlunge, at 866-588-8008 with your proof of purchase, the model number and a description of the problem. Register the product at saunaspa.com/register within 90 days of delivery. Contact us with your order number if you would like help with the claim.
KPlunge makes cold plunge tubs, all-in-one chiller tubs, inflatable plunges and plunge chillers for home recovery. It is part of SW Corp in Miami, Florida, alongside SaunaSpa, SteamSpa, ANZZI and MediTub.
KPlunge all-in-one plunges build the chiller, heater, controls and filtration into the tub: the 84-gallon Iroquois (CP-CH6732N) in white acrylic with a chestnut finish and a single circulating jet, and the larger Borealis (CP-CH7939) in blue (CP-CH7939BL) or white (CP-CH7939WH) with two jets and Bluetooth speakers. Buyers who prefer a separate chiller can pair the KPlunge cedar or inflatable tubs with the Gale 3/4 HP or 1 HP unit.
Proud to Have Served



















































