The Empava EMPV-59AIS04 is a 59" oval freestanding whirlpool tub for one bather, with a deep concave back that Empava designed for a relaxing sitting posture. It measures 59.06" L x 29.53" W x 29.53" H, holds 50 gallons and gives a 14.56" soaking depth, and the faucet and hand shower come with it.
7 Jets and a 50-Gallon Soak
Empava gave the back an enhanced concave curve compared to its conventional models; by aligning your back along this curve, it says, you get greater elongation in the discs of the spine and a more relaxing sitting posture. Toward the foot the interior tapers so it snugly wraps the legs, unlike tubs that leave excessive space around them, which Empava notes is particularly relaxing for slender or shorter bathers. The seating area is 37.0" long and 17.72" wide.
Seven hydromassage jets aim at the back, waist and legs, driven by a pump that plugs into a grounded 110/120V, 15 amp outlet. Empava placed the drain at the end of the tub to prevent the stopper accidentally popping up and interrupting your bath, and the waterproof headrest stays free from mold and, Empava says, needs only minimal cleaning each year.
The shell is white acrylic that Empava chose because it resists mildew and cracking and, in Empava's words, provides exceptional thermal insulation. The tub has no heater, and Empava advises against adding one. It weighs 105.82 lbs empty, and Empava offers brushed gold faucets for the EMPV-59AIS04.
Planning Around a 59.06" x 29.53" Footprint
Plan for an overall size of 59.06" L x 29.53" W x 29.53" H; empty, it weighs 105.82 lbs. It holds 50 gallons at a 14.56" soaking depth. The drain is on the right side, with a 1.65" opening. Empava's manual plans for a 31.5" drain pipe with the floor drain 12" from the tub drain, and 1/2" hot and cold supply connectors. For power, Empava lists 110/120V, 15A.
Choosing Within Empava's AIS Whirlpool Range
If you are weighing options within Empava's AIS freestanding whirlpool range, the models closest in nominal size are the EMPV-59AIS06, the EMPV-59AIS15 and the EMPV-59AIS36-BN. Each is listed with its own photos, specifications and documents, so you can compare size, capacity, jets and drain position against this model.
Empava designs its jetted tubs for fill-and-drain use: the tub is drained after each bath and refilled with fresh water, and the jets run only when the water covers the highest jet by at least 1" to 2". Its manual recommends flushing the pump and pipes before first use and once a month with hot water and a low-foaming detergent, and cleaning hair and lint from the suction cover, so the jets stay clean. Before installation, Empava asks you to run every function with water in the tub for a few minutes and report any defect.
In short, the EMPV-59AIS04 is an Empava 59" freestanding whirlpool tub with 7 jets and 50 gallons of water.
Features
Deep-Curve Lumbar Back
Empava gave this shell a more pronounced concave curve along the back than its standard tubs. Empava says aligning your back along this curve gives greater elongation in the discs of the spine and a more relaxing sitting posture.
Tapered Leg Well
The interior narrows toward the foot end and wraps around the legs. Empava says the tapered foot area supports the sitting posture effortlessly and is particularly relaxing for slender or shorter bathers.
Seven Targeted Jets
Seven hydromassage nozzles are placed for the back, waist and legs. The pump plugs into a grounded 110/120V, 15 amp outlet, with leakage protection as Empava's manual specifies.
Drain at the Far End
Empava put the drain at the end of the tub. It says the placement is there to prevent accidental popping up of the stopper that would interrupt your bath.
Faucet and Hand Shower Included
The faucet, hand shower, drain, drain pipe, overflow and headrest all ship with the tub. Empava's spec tab lists all six as included.
Low-Upkeep Headrest
The headrest is a waterproof pillow chosen to stay free of mold. It needs only minimal cleaning each year, and it ships with the tub along with the faucet, drain and overflow.
Heat-Holding Acrylic
The white acrylic shell resists cracking and mildew and insulates well. Empava says it chose this acrylic for exceptional thermal insulation, and the shell holds a 50-gallon fill.
Specifications
-
Model: EMPV-59AIS04
-
Overall Dimensions: 59.06" L x 29.53" W x 29.53" H
-
Capacity: 50 gallons
-
Soaking Depth: 14.56"
-
Installation: Freestanding
-
Shape: Oval
-
Material: Acrylic
-
Finish: White
-
Bath Therapy: Whirlpool
-
Number of Jets: 7
-
Heater / Thermostatic System: No
-
Drain Placement: Right-side
-
Drain Size: 1.65"
-
Recommended Users: 1-person
-
Electrical: 110/120V, 15A
-
Weight: 105.82 lbs
-
Seating Area: 37.0" L x 17.72" W
-
Pump Power Supply: 110/120V, 15A plug
-
Warranty: 3-year limited for regular buyers
What's Included
- EMPV-59AIS04 bathtub
- Faucet
- Hand shower
- Headrest
- Drain
- Drain pipe
- Overflow
Sold separately: Brushed gold faucet set (Empava offers one for this tub)
Installation & Care
Installation
Freestanding tub; overall 59.06" L x 29.53" W x 29.53" H, 105.82 lbs empty. Empava's spec tab lists a right-side drain. The tub's drain pipe is 31.5" long, and Empava's manual places the floor drain 12" from the tub drain so the pipe forms an S-bend odor trap; leave a drain opening of at least 2.0". Rough in 1/2" external-thread hot and cold supply connectors that stand 1.18" out from the wall, with a shutoff valve on each line where you can reach it for service. The pump runs on a grounded 15A outlet, with the external circuit behind a high-sensitivity, fast-trip GFCI (leakage-protection) switch (induced current below 15mA, trip time under 0.1 second, rated current above 30A), installed by a licensed electrician as Empava specifies. Before you set it in place, fill the tub and run every function for a few minutes: Empava asks that any defect is reported before installation.
Care
Flush the jet system before first use and once a month: fill with hot water (about 104°F) 0.9" to 1.2" above the jets, add 2 to 3 teaspoons of low-foaming dishwasher detergent, run the jets for 10 minutes and drain, then refill with cold water, run 15 minutes and drain again. Clear hair and lint from the suction cover regularly and never run the jets dry; the water must cover the highest jet by at least 1" to 2". Clean the acrylic with water or a mild detergent; acids, alkalis and solvent cleaners damage the surface. Light scratches can be wet-sanded with 1200 then 2000 grit paper and polished back to a gloss. In freezing weather, drain the tub and its pipes.
Resources
Shipping, Returns & Warranty
Empava ships this item from its warehouse in City of Industry, California, by LTL freight with curbside delivery: the carrier contacts you to schedule the delivery, and you move the item from the curb to its final spot. Orders are processed in 1 to 2 business days and freight transit usually takes 7 to 10 business days; some models are built to order, and we confirm the ship date by email. Shipping is free within the lower 48 states; for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused Empava products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a tub means freight, and a restocking fee of up to 20% may be deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
Empava's product page gives regular buyers of this bathtub a 3-year warranty. Empava's warranty policy covers the original purchaser, for everyday home use in the continental US, and Empava supplies replacement parts for covered parts free of charge. The policy does not cover commercial use, improper installation, insufficient or excessive electrical supply, misuse, finish wear from corrosive or abrasive cleaners, consumable parts such as light bulbs and filters, freight damage not recorded at delivery, or the cost of removing, servicing or installing the product.
Warranty claims. To claim the warranty, contact Empava's customer service team at service@empava.com or (888) 682-8882, as Empava's warranty policy directs. Contact us with your order number if you would like help with the claim.
About Empava
Empava is a kitchen and bath brand based in City of Industry, California. Alongside its cooking appliances it designs acrylic freestanding, alcove and corner bathtubs, whirlpool and air-massage tubs, walk-in tubs, outdoor hot tubs and cold plunge tubs, built around fixing the small everyday design flaws that other products leave alone.
The AIS series is Empava's freestanding acrylic whirlpool range. The classic models ship with the faucet, hand shower, drain, overflow and headrest, in 59" oval, double-ended, boat and rectangle shells (EMPV-59AIS04 to EMPV-59AIS15), ten 67" designs from oval and double-ended to high-back and boat (EMPV-67AIS01 to EMPV-67AIS17), and two 71" models, the double-ended EMPV-71AIS08 and boat-style EMPV-71AIS14. The newer LED models, such as the EMPV-59AIS36-BN and EMPV-67AIS38-BN, raise the count to 16 or 18 jets and add color lighting.
