The Empava EMPV-59PRO03 is a 59" diamond-shaped corner tub with water and air massage, an inline heater and LED mood lighting, built to bring a spa bath into a small bathroom. It measures 59.1" L x 59.1" W x 24.8" H, holds 124 gallons and gives a 15.76" soaking depth, with a left-side drain.
10 Water Jets and 10 Air Jets
The diamond outline fits into a corner, and Empava says the diamond shape saves space. Inside, the ergonomic backrest slope aligns with the spine, which Empava says promotes healthy posture while you soak, and a curved headrest supports the neck.
A 1.0 HP pump drives 10 water jets for a firm massage and 10 air jets for a gentle bubble soak. The inline heater holds the water between 77°F and 104°F through a long winter bath; Empava's manual adds that it stops at 104°F and only runs while the water is at least 77°F. LED lighting offers several colors for a calm mood.
The tub-mounted faucet has a self-cleaning system and a multi-function hand shower with four spray settings, so the nozzle stays clean between baths. The tub needs two separate 110/120V 15A plugs and weighs 216 lbs empty.
Planning Around a 59.1" x 59.1" Footprint
Plan for an overall size of 59.1" L x 59.1" W x 24.8" H; empty, it weighs 216 lbs. It holds 124 gallons at a 15.76" soaking depth. The drain is on the left side. Empava's manual plans for a 31.5" drain pipe with the floor drain 12" from the tub drain, and 1/2" hot and cold supply connectors. For power, Empava lists 110/120V, two separate dedicated grounded 15A outlets.
Choosing Within Empava's PRO Heated Tub Range
If you are weighing options within Empava's PRO heated tub range, the models closest in nominal size are the EMPV-71PRO01, the EMPV-71PRO02 and the EMPV-71PRO04. Each is listed with its own photos, specifications and documents, so you can compare size, capacity, jets and drain position against this model.
Its manual recommends flushing the pump and pipes before first use and once a month with hot water and a low-foaming detergent, and cleaning hair and lint from the suction cover, so the jets stay clean. Before installation, Empava asks you to run every function with water in the tub for a few minutes and report any defect.
In short, the EMPV-59PRO03 is an Empava 59" corner combination massage tub with 10 water jets, 10 air jets, a heater, LED lighting and 124 gallons of water.
Features
Diamond Corner Shape
The diamond outline fits into a corner. Empava says the diamond shape saves space and is ideal for small bathrooms.
124-Gallon Capacity
The basin holds 124 gallons at a 15.76" soaking depth, measured top to bottom on Empava's spec tab.
Water and Air Massage
Ten water jets give a firm massage and ten air jets a gentle bubble soak. A 1.0 HP pump powers the system.
Inline Heater
The heater holds the water between 77°F and 104°F. Empava's manual says it stops at 104°F.
Spine-Following Backrest
The backrest slope follows the spine and the curved headrest supports the neck. Empava says the slope promotes healthy posture.
Self-Cleaning Faucet
The tub-mounted faucet has a self-cleaning system. The hand shower offers four spray settings and its nozzle stays clean.
LED Mood Lighting
Integrated LED lighting offers several colors. Empava says the LED mood lighting creates a serene atmosphere.
Specifications
-
Model: EMPV-59PRO03
-
Overall Dimensions: 59.1" L x 59.1" W x 24.8" H
-
Capacity: 124 gallons
-
Soaking Depth: 15.76"
-
Installation: Alcove or corner
-
Shape: Diamond corner
-
Material: Acrylic
-
Finish: White
-
Bath Therapy: Whirlpool (water jets) with air bubble jets
-
Number of Jets: 10 water jets
-
Air Jets: 10
-
Heater / Thermostatic System: Yes, inline heater, 77°F to 104°F
-
Lighting: LED
-
Faucet Mount: Tub-mounted
-
Drain Placement: Left side
-
Recommended Users: 1-person
-
Electrical: 110/120V, two separate dedicated grounded 15A outlets
-
Weight: 216 lbs
-
Warranty: 3-year limited for regular buyers
What's Included
Installation & Care
Installation
Corner/alcove install, left-side drain; overall 59.1" L x 59.1" W x 24.8" H, 216 lbs empty. The faucet is tub-mounted. The tub's drain pipe is 31.5" long, and Empava's manual places the floor drain 12" from the tub drain so the pipe forms an S-bend odor trap; leave a drain opening of at least 2.0". Rough in 1/2" external-thread hot and cold supply connectors that stand 1.18" out from the wall, with a shutoff valve on each line where you can reach it for service. Empava's manual calls for two separate grounded, dedicated 15A outlets, with the external circuit behind a high-sensitivity, fast-trip GFCI (leakage-protection) switch (induced current below 15mA, trip time under 0.1 second, rated current above 30A), installed by a licensed electrician. Before you set it in place, fill the tub and run every function for a few minutes: Empava asks that any defect is reported before installation.
Care
Flush the jet system before first use and once a month: fill with hot water (about 104°F) 0.9" to 1.2" above the jets, add 2 to 3 teaspoons of low-foaming dishwasher detergent, run the jets for 10 minutes and drain, then refill with cold water, run 15 minutes and drain again. Clear hair and lint from the suction cover regularly and never run the jets dry. Clean the acrylic with water or a mild detergent; acids, alkalis and solvent cleaners damage the surface. Light scratches can be wet-sanded with 1200 then 2000 grit paper and polished back to a gloss. In freezing weather, drain the tub and its pipes.
Resources
Shipping, Returns & Warranty
Empava ships this item from its warehouse in City of Industry, California, by LTL freight with curbside delivery: the carrier contacts you to schedule the delivery, and you move the item from the curb to its final spot. Orders are processed in 1 to 2 business days and freight transit usually takes 7 to 10 business days; some models are built to order, and we confirm the ship date by email. Shipping is free within the lower 48 states; for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused Empava products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a tub means freight, and a restocking fee of up to 20% may be deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
Empava's product page gives regular buyers of this bathtub a 3-year warranty. Empava's warranty policy covers the original purchaser, for everyday home use in the continental US, and Empava supplies replacement parts for covered parts free of charge. The policy does not cover commercial use, improper installation, insufficient or excessive electrical supply, misuse, finish wear from corrosive or abrasive cleaners, consumable parts such as light bulbs and filters, freight damage not recorded at delivery, or the cost of removing, servicing or installing the product.
Warranty claims. To claim the warranty, contact Empava's customer service team at service@empava.com or (888) 682-8882, as Empava's warranty policy directs. Contact us with your order number if you would like help with the claim.
About Empava
Empava is a kitchen and bath brand based in City of Industry, California. Alongside its cooking appliances it designs acrylic freestanding, alcove and corner bathtubs, whirlpool and air-massage tubs, walk-in tubs, outdoor hot tubs and cold plunge tubs, built around fixing the small everyday design flaws that other products leave alone.
Empava's PRO series is its heated line: every model pairs water jets with air bubble jets, adds an inline heater that holds the water between 77°F and 104°F, and uses a tub-mounted faucet with a self-cleaning system and a multi-function hand shower. It runs from the compact diamond-shaped EMPV-59PRO03 corner tub to the two-person EMPV-71PRO01 (freestanding, with glass side panels), EMPV-71PRO02 (with a 1-meter waterfall), EMPV-71PRO04, and the EMPV-71PRO05, which adds Revi-Skin micro-bubble jets.
