The Empava EMPV-71AIS08 is a 71" double-ended freestanding whirlpool tub. It measures 70.87" L x 31.50" W x 23.62" H and holds 76 gallons at a 14" soaking depth. It is a one-person tub.
8 Jets and a 76-Gallon Soak
The double-ended shell has a sculpted lumbar arch that Empava says offers optimal support for the body, set in a sleek, angular outline with crisp lines. The drain is centered.
Eight jets are positioned for a full-body massage: two lumbar jets, four along the body and two at the feet. A 0.75 HP pump drives them, with a UL-certified motor, and the power cord comes pre-installed for a grounded 110/120V, 15 amp outlet. The polished chrome drain, overflow, faucet, knobs and shower head are pre-drilled and pre-installed; Empava also offers black, brushed gold, brushed nickel and bronze fixtures to switch to yourself.
The shell is 100% white acrylic reinforced with fiberglass for sturdiness, and Empava says it retains its sheen no matter how frequently it is used. The sleek surface facilitates effortless cleaning. Empty, it weighs 152.12 lbs. There is no heater; for heated water Empava points to its EMPV-59JT319LED and EMPV-67JT351LED, and for two people its EMPV-71JT667B and EMPV-72JT367LED.
Planning Around a 70.87" x 31.50" Footprint
Plan for an overall size of 70.87" L x 31.50" W x 23.62" H; empty, it weighs 152.12 lbs. It holds 76 gallons at a 14" soaking depth. The drain is in the center, with a 1.65" opening. Empava's manual plans for a 31.5" drain pipe with the floor drain 12" from the tub drain, and 1/2" hot and cold supply connectors. For power, Empava lists 110/120V, 15A.
Choosing Within Empava's AIS Whirlpool Range
If you are weighing options within Empava's AIS freestanding whirlpool range, the models closest in nominal size are the EMPV-71AIS14, the EMPV-71AIS35-BK and the EMPV-67AIS10. Each is listed with its own photos, specifications and documents, so you can compare size, capacity, jets and drain position against this model.
Empava designs its jetted tubs for fill-and-drain use: the tub is drained after each bath and refilled with fresh water, and the jets run only when the water covers the highest jet by at least 1" to 2". Its manual recommends flushing the pump and pipes before first use and once a month with hot water and a low-foaming detergent, and cleaning hair and lint from the suction cover, so the jets stay clean. Before installation, Empava asks you to run every function with water in the tub for a few minutes and report any defect.
In short, the EMPV-71AIS08 is an Empava 71" freestanding whirlpool tub with 8 jets and 76 gallons of water.
Features
71" Double-Ended Shell
The shell measures 70.87" L x 31.50" W. It holds 76 gallons at a 14" soaking depth, and Empava rates it for one person.
76-Gallon Soak
The basin holds 76 gallons at a 14" depth. Empava rates the tub for one person.
Sculpted Lumbar Arch
The double-ended design has a sculpted lumbar arch that Empava says offers optimal support for the body. The drain sits in the center of the tub.
Eight Placed Jets
Two lumbar jets, four body jets and two foot jets cover the body from back to feet. Empava positions them for a full-body massage.
0.75 HP Pump, UL Motor
A 0.75 HP pump with a UL-certified motor drives the jets. Empava says the UL-certified motor guarantees durability and long-lasting performance.
Fixtures Fitted in Chrome
The polished chrome faucet, knobs, shower head, drain and overflow are pre-installed. Black, brushed gold, brushed nickel and bronze sets are available to swap in.
Fiberglass-Reinforced Acrylic
The 100% acrylic shell is backed with fiberglass. Empava says this ensures enduring sturdiness and that the tub retains its sheen however frequently it is used.
Specifications
-
Model: EMPV-71AIS08
-
Overall Dimensions: 70.87" L x 31.50" W x 23.62" H
-
Capacity: 76 gallons
-
Soaking Depth: 14"
-
Installation: Freestanding
-
Shape: Double-ended
-
Material: Acrylic
-
Finish: White
-
Bath Therapy: Whirlpool
-
Number of Jets: 8
-
Heater / Thermostatic System: No
-
Drain Placement: Center
-
Drain Size: 1.65"
-
Recommended Users: 1-person
-
Electrical: 110/120V, 15A
-
Weight: 152.12 lbs
-
Pump: 0.75 HP
-
Motor: UL-certified
-
Fixture Finish: Chrome
-
Warranty: 3-year limited for regular buyers
What's Included
- EMPV-71AIS08 bathtub
- Faucet
- Hand shower
- Headrest
- Drain
- Drain pipe
- Overflow
Sold separately: Fixture sets in black, brushed gold, brushed nickel or bronze (Empava offers them for this tub)
Installation & Care
Installation
Freestanding, center drain; overall 70.87" L x 31.50" W x 23.62" H, 152.12 lbs empty. The power cord is pre-installed on the pump. The tub's drain pipe is 31.5" long, and Empava's manual places the floor drain 12" from the tub drain so the pipe forms an S-bend odor trap; leave a drain opening of at least 2.0". Rough in 1/2" external-thread hot and cold supply connectors that stand 1.18" out from the wall, with a shutoff valve on each line where you can reach it for service. The pump runs on a grounded 15A outlet, with the external circuit behind a high-sensitivity, fast-trip GFCI (leakage-protection) switch (induced current below 15mA, trip time under 0.1 second, rated current above 30A), installed by a licensed electrician as Empava specifies. Before you set it in place, fill the tub and run every function for a few minutes: Empava asks that any defect is reported before installation.
Care
Flush the jet system before first use and once a month: fill with hot water (about 104°F) 0.9" to 1.2" above the jets, add 2 to 3 teaspoons of low-foaming dishwasher detergent, run the jets for 10 minutes and drain, then refill with cold water, run 15 minutes and drain again. Clear hair and lint from the suction cover regularly and never run the jets dry; the water must cover the highest jet by at least 1" to 2". Clean the acrylic with water or a mild detergent; acids, alkalis and solvent cleaners damage the surface. Light scratches can be wet-sanded with 1200 then 2000 grit paper and polished back to a gloss. In freezing weather, drain the tub and its pipes.
Resources
Shipping, Returns & Warranty
Empava ships this item from its warehouse in City of Industry, California, by LTL freight with curbside delivery: the carrier contacts you to schedule the delivery, and you move the item from the curb to its final spot. Orders are processed in 1 to 2 business days and freight transit usually takes 7 to 10 business days; some models are built to order, and we confirm the ship date by email. Shipping is free within the lower 48 states; for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused Empava products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a tub means freight, and a restocking fee of up to 20% may be deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
Empava's product page gives regular buyers of this bathtub a 3-year warranty. Empava's warranty policy covers the original purchaser, for everyday home use in the continental US, and Empava supplies replacement parts for covered parts free of charge. The policy does not cover commercial use, improper installation, insufficient or excessive electrical supply, misuse, finish wear from corrosive or abrasive cleaners, consumable parts such as light bulbs and filters, freight damage not recorded at delivery, or the cost of removing, servicing or installing the product.
Warranty claims. To claim the warranty, contact Empava's customer service team at service@empava.com or (888) 682-8882, as Empava's warranty policy directs. Contact us with your order number if you would like help with the claim.
About Empava
Empava is a kitchen and bath brand based in City of Industry, California. Alongside its cooking appliances it designs acrylic freestanding, alcove and corner bathtubs, whirlpool and air-massage tubs, walk-in tubs, outdoor hot tubs and cold plunge tubs, built around fixing the small everyday design flaws that other products leave alone.
The AIS series is Empava's freestanding acrylic whirlpool range. The classic models ship with the faucet, hand shower, drain, overflow and headrest, in 59" oval, double-ended, boat and rectangle shells (EMPV-59AIS04 to EMPV-59AIS15), ten 67" designs from oval and double-ended to high-back and boat (EMPV-67AIS01 to EMPV-67AIS17), and two 71" models, the double-ended EMPV-71AIS08 and boat-style EMPV-71AIS14. The newer LED models, such as the EMPV-59AIS36-BN and EMPV-67AIS38-BN, raise the count to 16 or 18 jets and add color lighting.
