The Empava EMPV-71JT351 is a 70.9" alcove combination massage tub with waterfall outlets on both sides and LED lighting. It measures 70.9" L x 33.7" W x 23.8" H, holds 67 gallons and gives a 13.6" soaking depth, with a center drain.
10 Water Jets and 10 Air Jets
Two massage systems share the tub: 10 water jets give a focused massage on the back, waist and legs, and 10 air jets release fine bubbles for a softer, more relaxing soak.
Waterfall outlets on both sides let water cascade smoothly down the interior walls. Adjustable LED ambient lighting offers several colors, and the light gently diffuses through the water for a calming bath by day or night.
The spacious 70.9" interior gives room to recline with ample legroom and deep water coverage. The tub can be installed above the floor in an alcove or dropped into a surround. The faucet, hand shower, headrest, drain and overflow come with it, and it weighs 234 lbs empty. An inline heater keeps the water warm through the soak: Empava's manual says it stops at 104°F and only runs while the water is at least 77°F.
Planning Around a 70.9" x 33.7" Footprint
Plan for an overall size of 70.9" L x 33.7" W x 23.8" H; empty, it weighs 234 lbs. It holds 67 gallons at a 13.6" soaking depth. The drain is in the center, with a 1.65" opening. Empava's manual plans for a 31.5" drain pipe with the floor drain 12" from the tub drain, and 1/2" hot and cold supply connectors. For power, Empava lists 110/120V, two separate 15A dedicated GFCI circuits, each with a grounded plug.
Choosing Within Empava's JT Jetted Tub Range
If you are weighing options within Empava's JT jetted tub range, the models closest in nominal size are the EMPV-71JT351-BK, the EMPV-71JT408-BK and the EMPV-71JT408-BN. Each is listed with its own photos, specifications and documents, so you can compare size, capacity, jets and drain position against this model.
Its manual recommends flushing the pump and pipes before first use and once a month with hot water and a low-foaming detergent, and cleaning hair and lint from the suction cover, so the jets stay clean. Before installation, Empava asks you to run every function with water in the tub for a few minutes and report any defect.
In short, the EMPV-71JT351 is an Empava 71" alcove combination massage tub with 10 water jets, 10 air jets, a heater, LED lighting and 67 gallons of water.
Features
Water and Air Massage
Ten water jets work the back, waist and legs while ten air jets release fine bubbles.
Dual-Side Waterfalls
Waterfall outlets on both sides send water cascading smoothly down the interior walls of the 70.9" tub.
Adjustable LED Lighting
LED ambient lighting offers several colors that diffuse gently through the water. Empava says it creates a calming atmosphere whether used during the day or at night.
70.9" Spacious Interior
Empava says the spacious interior lets you recline naturally with ample legroom. Empava also cites deep water coverage; the basin holds 67 gallons.
Alcove or Drop-In
Empava confirms the tub can sit above the floor in an alcove or be dropped into a surround.
Center Drain
The drain is centered, per Empava's spec tab, with the tub listed for alcove or drop-in installation.
Fittings Included
The faucet, hand shower, headrest, drain and overflow ship with the tub, per Empava's included list.
Specifications
-
Model: EMPV-71JT351
-
Overall Dimensions: 70.9" L x 33.7" W x 23.8" H
-
Capacity: 67 gallons
-
Soaking Depth: 13.6"
-
Installation: Alcove or drop-in
-
Material: Acrylic
-
Finish: White
-
Bath Therapy: Whirlpool (water jets) with air bubble jets
-
Number of Jets: 10 water jets
-
Air Jets: 10
-
Heater / Thermostatic System: Yes, inline heater (stops at 104°F; runs only while the water is at least 77°F)
-
Lighting: LED ambient, multiple colors
-
Drain Placement: Center
-
Drain Size: 1.65"
-
Recommended Users: 1-person
-
Electrical: 110/120V, two separate 15A dedicated GFCI circuits, each with a grounded plug
-
Weight: 234 lbs
-
Warranty: 3-year limited for regular buyers
What's Included
- EMPV-71JT351 bathtub
- Faucet
- Hand shower
- Headrest
- Drain
- Overflow
Installation & Care
Installation
Alcove or drop-in install, center drain; overall 70.9" L x 33.7" W x 23.8" H, 234 lbs empty. Level it with the adjustable feet and a wrench. The tub's drain pipe is 31.5" long, and Empava's manual places the floor drain 12" from the tub drain so the pipe forms an S-bend odor trap; leave a drain opening of at least 2.0". Rough in 1/2" external-thread hot and cold supply connectors that stand 1.18" out from the wall, with a shutoff valve on each line where you can reach it for service. Empava's manual says the unit should be electrically grounded: it calls for two separate 110/120V 15A dedicated GFCI circuits, each fed by a dedicated plug with a ground electrode, and a high-sensitivity, fast-trip leakage-protection switch on the external circuit (induced current below 15mA, trip time under 0.1 second, rated current above 30A). It also calls for installation by a licensed contractor, electrician and plumber, and a No. 8 AWG copper bonding conductor to the pump's pressure connector. Before you set it in place, fill the tub and run every function for a few minutes: Empava asks that any defect is reported before installation.
Care
Flush the jet system before first use and once a month: fill with hot water (about 104°F) 0.9" to 1.2" above the jets, add 2 to 3 teaspoons of low-foaming dishwasher detergent, run the jets for 10 minutes and drain, then refill with cold water, run 15 minutes and drain again. Clear hair and lint from the suction cover regularly and never run the jets dry. Clean the acrylic with water or a mild detergent; acids, alkalis and solvent cleaners damage the surface. Light scratches can be wet-sanded with 1200 then 2000 grit paper and polished back to a gloss. In freezing weather, drain the tub and its pipes.
Resources
Shipping, Returns & Warranty
Empava ships this item from its warehouse in City of Industry, California, by LTL freight with curbside delivery: the carrier contacts you to schedule the delivery, and you move the item from the curb to its final spot. Orders are processed in 1 to 2 business days and freight transit usually takes 7 to 10 business days; some models are built to order, and we confirm the ship date by email. Shipping is free within the lower 48 states; for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused Empava products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a tub means freight, and a restocking fee of up to 20% may be deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
Empava's product page gives regular buyers of this bathtub a 3-year warranty. Empava's warranty policy covers the original purchaser, for everyday home use in the continental US, and Empava supplies replacement parts for covered parts free of charge. The policy does not cover commercial use, improper installation, insufficient or excessive electrical supply, misuse, finish wear from corrosive or abrasive cleaners, consumable parts such as light bulbs and filters, freight damage not recorded at delivery, or the cost of removing, servicing or installing the product.
Warranty claims. To claim the warranty, contact Empava's customer service team at service@empava.com or (888) 682-8882, as Empava's warranty policy directs. Contact us with your order number if you would like help with the claim.
About Empava
Empava is a kitchen and bath brand based in City of Industry, California. Alongside its cooking appliances it designs acrylic freestanding, alcove and corner bathtubs, whirlpool and air-massage tubs, walk-in tubs, outdoor hot tubs and cold plunge tubs, built around fixing the small everyday design flaws that other products leave alone.
Empava's JT line covers its acrylic jetted tubs. It runs from the compact Japanese-style air soakers (47" EMPV-48JT011 and 59" EMPV-59JT011) and the round EMPV-59JT005, through the space-saving EMPV-59JT319LED corner tub and the LED alcove tubs (EMPV-59JT408LED, EMPV-67JT408LED, EMPV-71JT408-BK and EMPV-71JT408-BN), to the combination tubs with waterfalls (the heated EMPV-67JT351LED and the 71" EMPV-71JT351 and EMPV-71JT351-BK) and two-person models such as the EMPV-71JT667B, EMPV-72JT367LED, EMPV-71JT801 and the 75" EMPV-75JT901.
