ANZZI FT-AZ099 Zenith Series 5.58 ft. Freestanding Bathtub in White
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Authorized dealer for 12+ brands · Real people on the phone, Mon to Fri
Shop NowRecent
Popular searches
Recent
Popular searches
+1 (307) 429-4122
support@mycleansupplies.com
Mon-Fri: 9am - 5pm (EST)
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The ANZZI FT-AZ099 is the Zenith Series 5.58' freestanding bathtub in white, a 67" L x 31.5" W x 23.6" H acrylic soaker with a center drain. Zenith's strength is depth without height: it gives 17.7" of soaking depth inside a rim that stands only 23.6" from the floor, and it holds 77.6 gallons for a full, deep soak.
Deep Inside, Easy to Step Into
Deep soakers often get their depth from tall sides that make the step in awkward. Zenith keeps the rim at 23.6", close to the height of ANZZI's Chand and Ami tubs, yet holds 17.7" of water, so you get a deep bath with a familiar step in.
That balance makes it a good fit for a shared primary bathroom, where one person wants a deep soak and another wants a tub that is easy to use every day. The 67" length gives room to recline, and the 77.6 gallon capacity means a full, warm bath, so check your water heater can keep up.
One-Piece Acrylic in Glossy White
ANZZI's specification sheet lists Zenith as one-piece acrylic in glossy white. One piece means no seams in the basin, and at 126 lbs empty it is a manageable carry for a small crew. The glossy finish is the kind that rinses clean with soap and hot water, and the pre-plumbed drain and overflow mean there are no parts to assemble before the tub is set.
Zenith is sold as the tub alone, so you choose the filler: a floor-mounted freestanding filler beside it, or a wall-mounted spout if it sits against a wall. Rough in the supply before the tub is placed.
Pre-Plumbed With a Chrome Overflow
The Zenith arrives pre-plumbed, with a built-in chrome overflow and a push-operated center drain already fitted, so the installer does not assemble drain parts: the tub is leak tested, set, connected to the floor drain and leveled. The overflow carries water away below the rim, which is what lets you fill a deep soaker right up without watching the faucet, and the push drain opens and closes with a press. It is RHINO ALLOY certified to ANZZI's quality standard.
Because ANZZI water tests its tubs at the factory and ships the Zenith pre-plumbed, install day comes down to two things: a floor that is level and strong enough, and a sound connection to the floor drain. ANZZI's install guide walks through both, including a 30 minute leak test before the tub is sealed in place.
For a deep soak with an easy step in, the ANZZI FT-AZ099 Zenith 67" acrylic freestanding tub gives 17.7" of depth and 77.6 gallons behind a 23.6" rim, in one-piece glossy white acrylic.
17.7" Soaking Depth
Zenith gives 17.7" of soaking depth while standing only 23.6" tall, so the soak is deep without an unusually high step in.
Standard 23.6" Height
At 23.6" high, the rim sits at a familiar height, which makes stepping in and out easier than with tall, deep soakers.
77.6 Gallon Capacity
The tub holds 77.6 gallons, a generous fill, so size the water heater for a deep bath.
67" x 31.5" Footprint
At 67" L x 31.5" W, Zenith suits a primary bathroom or a generous hall bath with room for a freestanding tub.
One-Piece Acrylic, 126 lbs
ANZZI's specification sheet lists Zenith as one-piece acrylic in glossy white; it weighs 126 lbs empty.
Center Push Drain
The push-operated center drain comes fitted to the pre-plumbed tub, with a built-in chrome overflow below the rim.
RHINO ALLOY Certified
Zenith is RHINO ALLOY certified to ANZZI's quality standard and ships pre-plumbed for a straightforward installation.
Sold separately: Tub filler, Permanent drain connection to the floor waste line
Installation
Freestanding, center drain. Overall 67" L x 31.5" W x 23.6" H; the tub weighs 126 lbs empty and holds 77.6 gallons, so confirm the floor can carry it full with a bather, and rough in the filler supply before the tub is set. ANZZI water tests its tubs at the factory, and its install guide asks you to repeat the test before the tub is set for good: on a flat surface, close the drain, fill the tub about half way, wait 30 minutes and check every seal. Then trace the tub's position on the floor, mark where the drain falls, set the tub, connect the drain and level it with the adjustable feet; the guide notes that a tub that leaks is almost always one that is not level. The flexible drain in the box is for that test only, and the installer supplies the permanent drain connection. Finish with a bead of silicone around the base and give it 24 hours to set before the first bath.
Care
Clean the acrylic regularly with regular soap and hot water on a non-abrasive cloth or sponge, which stops soap scum and mineral deposits from building up into a film that is harder to remove. If you need a stronger cleaner, test it on an inconspicuous area first, wipe it on, then rinse the surface completely with water right away and dry any overspray on the floor or the faucet; never let a cleaner soak on the tub. Avoid scouring pads and powders, which dull a gloss finish.
ANZZI ships this item from the SW Corp warehouse by LTL freight with curbside delivery: the carrier contacts you to schedule the delivery, and you move the item from the curb to its final spot. Orders usually leave the warehouse within 1 to 2 business days, and you'll get tracking by email as soon as it ships. Shipping is free within the lower 48 states; for Alaska or Hawaii, contact us before you order.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this bathtub to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
Zenith is a single-size 67" x 31.5" acrylic soaker. ANZZI's acrylic freestanding soakers cover many shapes and depths, from the 59" Britt to the deep 67" Eft, Maple, Prima, Trend and Zenith, the 68" Reginald and the 71" Ruby, plus Chand, Ami, Mone and Vault in more than one size, and the 65" Bank.
Proud to Have Served



















































