The ANZZI FT-AZ202 is the Leni Series 71" x 38" jetted whirlpool freestanding bathtub in white, with a reversible drain and a 54 gallon capacity. Leni is ANZZI's sculptural whirlpool tub, shaped after the ripple of a water droplet, with a sloped inner edge that forms two inclining armrests and 8 whirlpool jets, 4 of them grouped in a V across the lower back, plus a maintenance heater.
Shaped Like a Water Droplet
ANZZI says Leni's design resembles the resonance of a water droplet, the soft rings that spread across a still surface. The practical side of that shape is the inner edge: it slopes so that it works as two comfortable inclining armrests, giving your arms somewhere to rest while you lie back in the water.
Whirlpool Jets Aimed at the Back
The whirlpool system pairs 4 directional jets with 4 focused jets set in a V-shaped pattern behind the back. ANZZI calls this VS jetting: the V targets the lats and the lower back, the places that tighten after a day at a desk or on your feet. Raised easy-push buttons and whirlpool pressure controls let you set the intensity, and a maintenance heater keeps the water warm through the session.
Big Footprint, Comfortable Basin
Leni measures 71.5" L x 38.75" W x 23.625" H overall, with a 55.5" L x 27" W basin and an average 54 gallon fill. The generous outside width carries the sloped armrest edge, so plan for a primary bathroom with space around the tub. The drain location is reversible, which helps match an existing floor drain.
Fiberglass-Reinforced Acrylic, IAPMO Listed
The shell is marine grade acrylic with fiberglass reinforcement for a smooth, long-lasting shine and durability, in glossy ultra white with matching trim. Leni is IAPMO listed. Note that the drain and overflow are not included, so budget for a drain and overflow kit and the tub filler alongside the tub.
Power is the other thing to plan. ANZZI's manual has the tub factory wired for 110V on a dedicated 20A GFCI breaker that feeds nothing else, plus a second dedicated 15A breaker for the heater, and it asks for a licensed plumber and electrician. Have both circuits in place and the floor drain roughed in before the tub is delivered, and leave the pump reachable for future service.
For a whirlpool bath with armrests and back-focused jets, the ANZZI FT-AZ202 Leni 71" freestanding tub combines a droplet-inspired shape, 8 whirlpool jets and a maintenance heater in fiberglass-reinforced acrylic.
Features
Sloped Armrest Edge
The sloped inner edge forms two inclining armrests, so your arms rest comfortably while you lie back in the jets.
V-Shaped Back Jets
Four focused jets in a V-shaped pattern target the lats and lower back, with four directional jets for the rest of the body.
Adjustable Whirlpool Pressure
Raised easy-push buttons and whirlpool pressure controls let you set the massage from gentle to firm.
Maintenance Heater
The heater maintains a warm, comfortable bathing temperature, so a long session stays warm.
55.5" x 27" Basin, 54 Gallons
The basin measures 55.5" L x 27" W and holds an average 54 gallons inside a 71.5" L x 38.75" W tub.
Reversible Drain
The drain location is reversible, which helps match the tub to an existing floor drain in a remodel.
Fiberglass-Reinforced Acrylic
Marine grade acrylic with fiberglass reinforcement gives a smooth, long-lasting shine, with matching trim.
IAPMO Listed
Leni is IAPMO listed, a plumbing product listing your inspector may ask to see.
Specifications
-
Model: FT-AZ202
-
Overall Dimensions: 71.5" L x 38.75" W x 23.625" H
-
Basin Dimensions: 55.5" L x 27" W
-
Water Capacity: 54 gallons
-
Weight (jetted, spec sheet): 135 lbs
-
Soaking Depth: 15" (spec sheet)
-
Interior Base: 44.5" L x 21.5" W
-
Drain to Side Wall: 19.375"
-
Drain to Nearest Wall: 15.75"
-
Material: Marine grade acrylic with fiberglass reinforcement
-
Finish: Glossy ultra white, matching trim
-
Installation Type: Freestanding
-
Whirlpool Jets: 8 (4 directional, 4 focused V-shaped back jets)
-
Heater: Maintenance heater
-
Controls: Raised easy-push buttons, whirlpool pressure controls
-
Drain: Reversible; drain and overflow not included
-
Electrical: 110V; dedicated 20A GFCI plus dedicated 15A for the heater (manual)
-
Certification: IAPMO listed
-
Faucet: Not included
-
Series: Leni
-
Warranty: Limited lifetime (register within 90 days)
What's Included
- ANZZI FT-AZ202 Leni whirlpool freestanding bathtub
Sold separately: Drain and overflow kit, Tub filler, Dedicated electrical circuits
Installation & Care
Installation
Freestanding jetted tub. Overall 71.5" L x 38.75" W x 23.625" H. The tub is factory wired for 110V and needs a dedicated 20A GFCI breaker that supplies nothing else; because it carries a heater, the manual calls for an additional dedicated 15A breaker. Connections should be made by a licensed plumber and electrician, and the pump must stay reachable for service. Test the jets and plumbing before the installation is finished, and only run the pump with the water 2" over the jets. Level the tub on a floor that can carry it full, connect the drain to the floor waste line and seal the joint, and keep the pump side accessible.
Care
Clean the acrylic with mild soap or a mild detergent and a damp, non-abrasive cloth; the manual warns that abrasives dull or scratch acrylic and that oil based solvents must not be used. Per ANZZI's care guide, test any stronger cleaner on an inconspicuous area, rinse completely with water right after applying it and do not let it soak. Flush the jet system at least every 90 days by filling the tub, running the pump with a mild sanitizing solution and draining, and do not use bubble bath while the jets are running.
Resources
Shipping, Returns & Warranty
ANZZI ships this item from the SW Corp warehouse by LTL freight with curbside delivery: the carrier contacts you to schedule the delivery, and you move the item from the curb to its final spot. Orders usually leave the warehouse within 1 to 2 business days, and you'll get tracking by email as soon as it ships. Shipping is free within the lower 48 states; for Alaska or Hawaii, contact us before you order.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this bathtub to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
About ANZZI
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
Leni is a single 71" x 38" whirlpool tub. ANZZI's other jetted freestanding tubs include Heidi, Lori, Sofi, Leni, Julia and the stone resin Stone Bell.
