ANZZI FT-AZ411-59 Britt 59" x 30" Flat Bottom Acrylic Freestanding Soaking Bathtub with Center Drain in Glossy White
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Authorized dealer for 12+ brands · Real people on the phone, Mon to Fri
Shop NowRecent
Popular searches
Recent
Popular searches
+1 (307) 429-4122
support@mycleansupplies.com
Mon-Fri: 9am - 5pm (EST)
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The ANZZI FT-AZ411-59 is the Britt Series 59" x 30" flat-bottom freestanding soaking tub in glossy white, with a center drain. Britt is a seamless one-piece acrylic tub with an elegantly curved shape and a sloping backrest, made for a long, hot, bubble-bath kind of soak. At 59" long it suits a bathroom where a standard 5' tub used to be, and it measures 59.06" L x 29.53" W x 22.44" H overall, has a 41.73" x 22" sitting area, gives 13.78" of soaking depth and holds 79 gallons of water.
A 59" Soaker That Still Lets You Lie Back
ANZZI designed Britt to cradle the body as you sink in. The backrest slopes so you can lean back into the water, and the interior, which ANZZI calls cavernous, lets you stretch your legs rather than sit with your knees up. ANZZI likens it to an in-home hot springs bath, and the 13.78" of soaking depth and 79 gallon capacity back that up for a tub of this footprint.
The flat bottom has a slip-resistant texture, which gives you a more secure foothold when you stand to rinse or step out over the side. That is worth having on any freestanding tub, and especially in a family bathroom or for anyone who is careful on wet surfaces.
Fiberglass-Reinforced Acrylic, Chrome Trim
The shell is marine grade acrylic reinforced with fiberglass and RHINO ALLOY certified. The acrylic gives the smooth, long-lasting high gloss finish, and the fiberglass backing gives the shell its stiffness. ANZZI rates the finish low maintenance and easy to clean, so a soft cloth and soap keep it looking new.
Discreet adjustable feet sit under the tub so the installer can set it perfectly level, which keeps water flowing to the center drain and the seals tight. The drain and overflow are included in polished chrome trim, so the only plumbing to buy is the filler and the connection to your floor drain.
Pair It With a Freestanding Filler
Britt is filled by a freestanding tub filler set on the floor beside it. ANZZI says it pairs with any ANZZI freestanding faucet and recommends the FS-AZ0047CH. Because it is a non-jetted soaker, there is no wiring to run.
For a compact bathroom that still deserves a real soaking tub, the ANZZI FT-AZ411-59 Britt 59" freestanding bathtub gives a curved, supportive soak in a one-piece acrylic shell that levels on adjustable feet.
Sloping Backrest for Reclining
The backrest slopes back so you can lie back in the water instead of sitting upright against a straight wall.
59" x 30" Footprint, 79 Gallons
The tub measures 59.06" L x 29.53" W x 22.44" H and holds 79 gallons with 13.78" of soaking depth, so it fits where a standard 5' tub sat and still gives a full soak.
Slip-Resistant Floor Texture
The flat bottom is textured for a more secure foothold, which helps when you stand to rinse or step out with wet feet.
41.73" x 22" Sitting Area
The sitting area inside measures 41.73" x 22", which gives an adult room to sit back and stretch out within a compact outside size.
Fiberglass-Reinforced Acrylic
Marine grade acrylic backed with fiberglass gives a stiff shell and a smooth high gloss surface that is RHINO ALLOY certified and easy to clean.
Adjustable Leveling Feet
Discreet adjustable feet let the tub be leveled on an uneven floor, so water drains fully and the drain seals stay tight.
Chrome Drain and Overflow Included
The drain and overflow come with the tub in polished chrome trim, so you do not need a separate drain kit for the tub itself.
Sold separately: Freestanding tub filler, Permanent drain connection to the floor waste line
Installation
Freestanding, center drain. Overall 59.06" L x 29.53" W x 22.44" H; leave open floor around the tub for the filler and for cleaning, and confirm the floor can carry the tub with 79 gallons of water and a bather. Rough in the supply for a floor-mounted filler first. ANZZI water tests its tubs at the factory, and its install guide asks you to repeat the test before the tub is set for good: on a flat surface, close the drain, fill the tub about half way, wait 30 minutes and check every seal. Then trace the tub's position on the floor, mark where the drain falls, set the tub, connect the drain and level it with the adjustable feet; the guide notes that a tub that leaks is almost always one that is not level. The flexible drain in the box is for that test only, and the installer supplies the permanent drain connection. Finish with a bead of silicone around the base and give it 24 hours to set before the first bath.
Care
Clean the acrylic regularly with regular soap and hot water on a non-abrasive cloth or sponge, which stops soap scum and mineral deposits from building up into a film that is harder to remove. If you need a stronger cleaner, test it on an inconspicuous area first, wipe it on, then rinse the surface completely with water right away and dry any overspray on the floor or the faucet; never let a cleaner soak on the tub. Avoid scouring pads and powders, which dull a gloss finish.
ANZZI ships this item from the SW Corp warehouse by LTL freight with curbside delivery: the carrier contacts you to schedule the delivery, and you move the item from the curb to its final spot. Orders usually leave the warehouse within 1 to 2 business days, and you'll get tracking by email as soon as it ships. Shipping is free within the lower 48 states; for Alaska or Hawaii, contact us before you order.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this bathtub to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
Britt is a single-size series: the 59" x 30" curved acrylic soaker in glossy white. Shoppers who want the same curved, fiberglass-reinforced build in a 67" length or packaged with a toilet can look at ANZZI's Ami Series.
Proud to Have Served



















































