The ANZZI LS-AZ910 Innovio Series is an 18.1" x 13" rectangular glass vessel sink in matte white, supplied with a chrome pop-up drain and mounting hardware so it is ready to install out of the box. It has sleek, simple lines and modern-art minimalism, with a design that saves space in a bathroom or powder room.
Outside, the sink measures 18.1" W x 13" D x 3.9" H; inside, the basin is 17.15" W x 12.05" D x 3.43" H, with an 8.86" wide bottom.
The Innovio mounts on top of the vanity instead of into it, which frees up space in the cabinet below. The sink is a sturdy one-piece glass construction, and ANZZI applies a nano water coating, a protective water guard that fights soap and water stains on the matte white surface.
The included chrome pop-up drain fits the drain opening, so the sink is ready to install. ANZZI highly recommends professional installation.
Sizing the Faucet to a 3.9" Bowl
Because this above-counter sink stands 3.9" tall, choose a faucet whose spout clears the rim. Two layouts work: a tall single-hole vessel faucet on the countertop behind the basin, or a wall-mount faucet plumbed through the wall above it. ANZZI's single-handle vessel faucets include the Harmony (L-AZ095) has an 8.77" spout height and 4.97" reach, and the Key (L-AZ097) an 8.82" spout height and 4.71" reach, both flowing at 1.2 GPM.
Counter Fit and Drain
The countertop needs just one hole. ANZZI's vessel sink instructions set the bowl over a 2" drain hole in the counter; a vessel drain then passes through the opening in the base of the bowl, and the included pop-up drain covers that step. Because the basin sits on top, the finished rim height is the vanity height plus the 3.9" bowl.
Keeping Matte White Glass Clear
Clean with regular soap and hot water and a non-abrasive cloth or sponge, then rinse fully and wipe. Test any stronger cleaner on a hidden spot first, and never let a cleaner sit and soak on the surface.
Completing the Innovio Setup
The LS-AZ910 is also available as LS-AZ911MB in matte black.
The LS-AZ910 is an ANZZI 18.1" rectangular glass vessel sink in matte white with a low 3.9" profile, a nano water coating against soap and water stains, and the drain and mounting hardware included.
Features
Matte White Glass
ANZZI pairs the Innovio's sleek, simple lines with a white finish, and the same shape comes in matte black (LS-AZ911MB).
Ready to Install, Drain Included
ANZZI packs a chrome pop-up drain assembly and mounting hardware with the sink, so it is ready to install out of the box.
Shallow Rectangular Basin
The 17.15" W x 12.05" D inner basin is 3.43" deep with an 8.86" wide flat bottom.
18.1" x 13" Outer Size
Outside, the sink measures 18.1" W x 13" D x 3.9" H, around a 17.15" W x 12.05" D inner basin.
Nano Water Coating
ANZZI coats the glass with a protective water guard that fights soap and water stains.
One-Piece Glass Construction
The sink is a sturdy one-piece construction in premium glass, built to stand the test of time.
Mounts on Top of the Vanity
The sink mounts to the top of the vanity instead of into it, freeing up space in the cabinet below.
Specifications
-
Model: LS-AZ910
-
Outer Dimensions: 18.1" W x 13" D x 3.9" H
-
Inner Basin: 17.15" W x 12.05" D x 3.43" H
-
Bottom Width: 8.86"
-
Shape: Rectangular
-
Material: Glass, one-piece, nano water coated
-
Finish: Matte White
-
Mounting: Top mount (vessel)
-
Drain: Chrome pop-up drain included
-
Series: Innovio
-
Warranty: Limited lifetime (register within 90 days)
What's Included
- LS-AZ910 Innovio Series rectangular vessel sink in matte white glass
- Chrome pop-up drain assembly
- Mounting hardware
Sold separately: Faucet
Installation & Care
Installation
Top mount over a single drain hole in the counter. Following ANZZI's vessel sink instructions, set the sink upside down on a soft cloth, run a continuous bead of silicone around the base where it rests on the counter, turn it over and position it over the drain hole, wipe off the excess with a damp cloth and let the silicone dry for 24 hours. Then fit the included drain in the drain opening with thread sealant, hand-tighten the lock nut and finish with a basin wrench. ANZZI recommends a professional if you are unfamiliar with this type of installation. ANZZI's spec drawing shows a 1.8" drain opening.
Care
Clean the glass with regular soap and hot water and a non-abrasive cloth or sponge, then rinse and wipe dry. Avoid abrasive pads; test any stronger cleaner on a hidden area first and do not let cleaner soak on the surface.
Resources
Shipping, Returns & Warranty
ANZZI ships this item from the SW Corp warehouse by UPS, FedEx or USPS, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this product to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
About ANZZI
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
The Innovio comes in matte white (LS-AZ910) and matte black (LS-AZ911MB) with the same chrome pop-up drain. It is the low rectangular option in ANZZI's glass vessel sinks, next to round bowls such as the Accent and Etude.
