The MRCOOL Central Ducted Hyper Heat 2nd Gen heat pump system pairs a cold-climate inverter condenser with a VersaPro multi-position air handler of the same capacity and a MRCOOL Smart Thermostat, in five sizes from 2 to 5 tons. It runs on R-454B refrigerant, reaches up to 18.3 SEER2 on the 2-ton pair, and keeps heating in outdoor air down to -22°F.
It suits a home in a cold region replacing a furnace or older heat pump on existing ductwork. Installation is by a licensed HVAC contractor.
Features
Cold-Climate Heating
Operates in outdoor air down to -22°F and is rated for up to 100% of its heating output at -5°F.
Matched Pair
Each system combines a CENTRAL condenser with the VersaPro MVP air handler of the same capacity, the pairing in MRCOOL's AHRI data.
Inverter Efficiency
Up to 18.3 SEER2 and 10.2 HSPF2 in Region IV depending on size, with ENERGY STAR Cold Climate ratings on all five sizes.
Smart Thermostat Included
The MRCOOL Smart Thermostat works with the SmartHVAC app for schedules and remote control, and the system also accepts third-party thermostats.
Multi-Position Air Handler
Installs upflow, downflow or horizontal in either direction, with a slide-out blower and self-diagnostics.
Gold Fin Condenser Coil
A painted galvanized steel cabinet and Gold Fin coil coating resist salt air and industrial pollution.
Optional Backup Heat
An electric heat kit in the air handler can switch on automatically below 5°F for emergency heat.
Specifications
-
Voltage: 208-230V
-
Phase: 1
-
Frequency: 60 Hz
-
Refrigerant: R-454B
-
Liquid Line: 3/8"
-
Suction Line: 3/4"
-
Wi-Fi: Yes
-
AHRI Certified: Yes
-
Color: Gray
-
Air Handler Max Fuse / Breaker: 15 A
24,000 BTU
-
Model: CENTRAL-24-HP-230B00-O
-
Cooling Capacity: 23,000 BTU/h
-
Heating Capacity: 24,000 BTU/h
-
Nominal Tonnage: 2 ton
-
SEER2: 18.3
-
EER2: 11.7
-
Minimum Circuit Ampacity: 19 A
-
Max Fuse / Breaker: 20 A
-
Refrigerant Charge: 74.08 oz
-
Sound Level: 60 dBA
-
Outdoor Unit Dimensions: 35.04"W x 13.46"D x 26.5"H
-
Outdoor Unit Weight: 102.29 lbs
-
Outdoor Fan Airflow: 1,765.7 CFM
-
ENERGY STAR: Yes (V6.1 and V6.1 Cold Climate, per MRCOOL brochure)
-
Air Handler Model: MVP-24-HP-MUAH-230A00-O
-
Indoor Airflow (Turbo/High/Med/Low): 824.04 / 759.29 / 694.55 / 629.8 CFM
-
Air Handler Minimum Circuit Ampacity (115V/230V): 5.5/4.0 A
-
Indoor Unit Dimensions: 17.52"W x 21.02"D x 45"H
-
Indoor Unit Weight: 105.6 lbs
30,000 BTU
-
Model: CENTRAL-30-HP-230B00-O
-
Cooling Capacity: 30,000 BTU/h
-
Heating Capacity: 34,000 BTU/h
-
Nominal Tonnage: 2.5 ton
-
SEER2: 16.8
-
EER2: 11.7
-
Minimum Circuit Ampacity: 29.5 A
-
Max Fuse / Breaker: 30 A
-
Refrigerant Charge: 105.82 oz
-
Sound Level: 60.5 dBA
-
Outdoor Unit Dimensions: 37.24"W x 16.14"D x 31.89"H
-
Outdoor Unit Weight: 164.02 lbs
-
Outdoor Fan Airflow: 3,001.8 CFM
-
ENERGY STAR: Yes (V6.1 and V6.1 Cold Climate, per MRCOOL brochure)
-
Air Handler Model: MVP-30-HP-MUAH-230A00-O
-
Indoor Airflow (Turbo/High/Med/Low): 988.85 / 894.67 / 806.38 / 712.21 CFM
-
Air Handler Minimum Circuit Ampacity (115V/230V): 8.0/6.0 A
-
Indoor Unit Dimensions: 21.02"W x 21.02"D x 49.02"H
-
Indoor Unit Weight: 128.97 lbs
36,000 BTU
-
Model: CENTRAL-36-HP-230B00-O
-
Cooling Capacity: 36,000 BTU/h
-
Heating Capacity: 37,000 BTU/h
-
Nominal Tonnage: 3 ton
-
SEER2: 17.4
-
EER2: 11.7
-
Minimum Circuit Ampacity: 29 A
-
Max Fuse / Breaker: 30 A
-
Refrigerant Charge: 126.99 oz
-
Sound Level: 62.5 dBA
-
Outdoor Unit Dimensions: 38.58"W x 16.34"D x 38.39"H
-
Outdoor Unit Weight: 204.15 lbs
-
Outdoor Fan Airflow: 3,001.8 CFM
-
ENERGY STAR: Yes (V6.1 and V6.1 Cold Climate, per MRCOOL brochure)
-
Air Handler Model: MVP-36-HP-MUAH-230A00-O
-
Indoor Airflow (Turbo/High/Med/Low): 1,188.97 / 1,083.02 / 971.19 / 865.24 CFM
-
Air Handler Minimum Circuit Ampacity (115V/230V): 8.0/6.0 A
-
Indoor Unit Dimensions: 21.02"W x 21.02"D x 49.02"H
-
Indoor Unit Weight: 129.41 lbs
48,000 BTU
-
Model: CENTRAL-48-HP-230B00-O
-
Cooling Capacity: 48,000 BTU/h
-
Heating Capacity: 50,000 BTU/h
-
Nominal Tonnage: 4 ton
-
SEER2: 16.5
-
EER2: 10.5
-
Minimum Circuit Ampacity: 38 A
-
Max Fuse / Breaker: 40 A
-
Refrigerant Charge: 134.04 oz
-
Sound Level: 65 dBA
-
Outdoor Unit Dimensions: 38.58"W x 16.34"D x 38.39"H
-
Outdoor Unit Weight: 201.06 lbs
-
Outdoor Fan Airflow: 3,037.1 CFM
-
ENERGY STAR: V6.1 Cold Climate ticked in MRCOOL brochure; V6.1 not ticked
-
Air Handler Model: MVP-48-HP-MUAH-230A00-O
-
Indoor Airflow (Turbo/High/Med/Low): 1,600.99 / 1,471.5 / 1,283.15 / 1,094.8 CFM
-
Air Handler Minimum Circuit Ampacity (115V/230V): 14.5/11.0 A
-
Indoor Unit Dimensions: 24.49"W x 21.02"D x 52.99"H
-
Indoor Unit Weight: 162.92 lbs
60,000 BTU
-
Model: CENTRAL-60-HP-230B00-O
-
Cooling Capacity: 54,000 BTU/h
-
Heating Capacity: 56,000 BTU/h
-
Nominal Tonnage: 5 ton
-
SEER2: 16
-
EER2: 10
-
Minimum Circuit Ampacity: 40 A
-
Max Fuse / Breaker: 40 A
-
Refrigerant Charge: 183.42 oz
-
Sound Level: 65 dBA
-
Outdoor Unit Dimensions: 37.48"W x 16.34"D x 52.48"H
-
Outdoor Unit Weight: 242.95 lbs
-
Outdoor Fan Airflow: 2,648.6 CFM
-
ENERGY STAR: V6.1 Cold Climate ticked in MRCOOL brochure; V6.1 not ticked
-
Air Handler Model: MVP-60-HP-MUAH-230A00-O
-
Indoor Airflow (Turbo/High/Med/Low): 1,807 / 1,583.33 / 1,359.67 / 1,136 CFM
-
Air Handler Minimum Circuit Ampacity (115V/230V): 14.5/11.0 A
-
Indoor Unit Dimensions: 24.49"W x 21.02"D x 52.99"H
-
Indoor Unit Weight: 162.92 lbs
What's Included
- MRCOOL Central Ducted Hyper Heat 2nd Gen condenser in the selected capacity
- MRCOOL VersaPro multi-position air handler in the matching capacity
- MRCOOL Smart Thermostat with manual
- 24V thermostat adapter and 24V transformer adapter (for 115V)
- Braze-to-flare adapters and flare nuts
- Drain joint, rubber installation pads, insulation sleeves, sound-deadening pads and cable ties
- Owner's and installation manual
Installation
Professional installation required. This equipment must be installed by a licensed HVAC contractor (EPA Section 608-certified for any refrigerant work), following MRCOOL's installation manual and all local codes, permits and licensing rules. MRCOOL's limited warranty applies only to units installed that way, and it does not cover installation labor.
Refrigerant lines are 3/8" liquid and 3/4" suction and are not included. The factory charge covers 24.6' of line, plus 0.7 oz of R-454B per additional foot, up to a maximum length of 164' (24,000 and 30,000 BTU) or 246' (36,000 to 60,000 BTU) and a maximum height difference of 82' or 98.4'. The air handler is for ducted use only, with an external static pressure range of 0.00 to 0.80 in. w.c. The condenser takes a 208/230V single-phase supply and the air handler 115/208/230V; circuit sizes are in the Specifications tab. The air filter and heat kit are sold separately.
Resources
Shipping, Returns & Warranty
Ships to addresses in the United States only, by freight carrier for the larger cartons. Shipping cost is calculated at checkout, and the carrier may call ahead to book a delivery window.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
MRCOOL handles returns through the store you bought from, so your return comes to us. Unopened, unused MRCOOL equipment can be returned within 21 days of delivery with a return authorization from us. You pay the return shipping, and a restocking fee of up to 20% may be deducted along with payment processing fees. Opened, installed or used equipment and special-order items can't be returned.
MRCOOL's Central Ducted Hyper Heat 2nd Gen brochure gives the original owner a non-transferable limited warranty of 10 years on the compressor, 10 years on parts and 10 years of labor. Labor during the first 90 days is the responsibility of the installing company. Full terms, registration steps and exclusions are in the MRCOOL warranty document under Resources.
Warranty claims. MRCOOL handles warranty claims directly through support.mrcool.com or (270) 366-0457. Some MRCOOL warranties cover the original purchaser only. Systems that aren't DIY need a valid installation invoice to open a claim.
About MRCOOL
MRCOOL designs heating, cooling and water-heating equipment from its home base in Hickory, Kentucky. The range runs from DIY ductless mini-splits, built around MRCOOL's patented pre-charged Quick Connect line sets, through contractor-installed mini-splits, central split systems, packaged units and gas furnaces, to HeatWise water heaters and CoolBlade HVLS fans for warehouses and shops.
Central Ducted Hyper Heat 2nd Gen is MRCOOL's contractor-installed cold-climate central heat pump on R-454B, in five sizes from 2 to 5 tons. Each CENTRAL condenser is rated with the VersaPro multi-position air handler of the same capacity (CENTRAL-36-HP-C-230B00-O with MVP-36-HP-MUAH-230A00-O, for example), and the pair is also sold as a complete system with a MRCOOL Smart Thermostat. Electric heat kits and MRCOOL's No-Vac Quick Connect line sets, which arrive charged with refrigerant, are optional extras sold separately.