A dual-vacuum extractor package on one cord.
Dual 3-stage vacuums and a 220 PSI pump on a single 50' cord, packaged with a 25' hose combo, a 12" dual jet wand and System Maintainer.
Ships with the 8100 25' hose set, the 8300-EZ 12" wand and a gallon of System Maintainer.
25' hose combo
Dual 3-stage low-amp vacuum motors run with the pump on a single 50' twist-lock cord.
200 CFM airflow
Built-in loading wheels get it in and out of a work vehicle.
104 lb extractor weight
What it is
The Mytee 2005CS Contractor's Special is a portable carpet extractor package for residential and commercial carpet cleaning and hard-surface extraction. The extractor pairs a 220 PSI diaphragm demand pump (1.35 GPM) with dual 3-stage low-amp vacuum motors rated at 200 CFM and 130" of water lift, all running on a single power cord. It ships with a 25' vacuum and solution hose combo, a 12" dual jet wand and a gallon of System Maintainer extractor descaler.
Tanks and filling
Its solution and recovery tanks hold 10 gallons each. The solution tank fills from a faucet with the faucet fill hose, a clear recovery tank lid shows what is coming out of the carpet, and a prime valve sits on the solution line. Contractor's Special packages are designed for routine carpet maintenance in offices, schools, residences and more, and Mytee pre-assembles them so the wand, hose and connections already match the extractor.
Power and heat
The 2005CS runs on a single detachable 50' 12/3 twist-lock power cord and draws 20 A at 115 V. It is an unheated extractor; the 2008CS is the heated version, and Mytee's 240-120 Hot Turbo and 480-120 Hot Twin Turbo portable heaters can be added.
Moving it
10" foam-filled, non-marking rear wheels and 4" locking front casters move it around the job, and built-in loading wheels let you roll it into a work vehicle without a ramp. The housing is roto-molded polyethylene that resists rust and dents, with an easy-open lid, a bucket-height drain and waist-high switches.
Package and warranty
The package includes Mytee's 8100 hose set (25' crush-proof 1.5" vacuum hose and high-pressure solution hose), the 8300-EZ 12" dual jet stainless steel wand, a 2" to 1.5" Cuff-Lynx reducer and one gallon of System Maintainer (refills: 3601G four-pack). The 8400P Air Lite tool adds upholstery cleaning. The extractor is covered by Mytee's warranty: 1 year parts and labor, 2 years on major components such as pumps, vacuum motors and heaters, and 10 years on roto-molded housings and tanks.
At a glance
-
Pump220 PSI
-
Vacuums200 CFM, 130"
-
Tanks10 / 10 gal
-
Power cord1 x 50'
-
Hose25' combo
-
Wand12" dual jet
Ready-To-Clean Package
Ships with the 8100 25' hose set, the 8300-EZ 12" dual jet wand and one gallon of System Maintainer.
Single-Cord Operation
One 50' 12/3 twist-lock cord runs both vacuums and the pump from a 20 A outlet.
Dual 3-Stage Low-Amp Vacuums
200 CFM and 130" of water lift to clean and dry carpet.
220 PSI Demand Pump
A 1.35 GPM diaphragm pump with a prime valve on the solution line.
Faucet Fill Hose
Fill the solution tank from a standard faucet.
Built-In Loading Wheels
Roll the extractor in and out of a work vehicle without a ramp.
Easy-Open Lid and Bucket-Height Drain
Check and empty the recovery tank without lifting the machine.
Roto-Molded Polyethylene Housing
Resists rust and dents, with 10 years of Mytee warranty coverage on housings and tanks.
Key specs
Vacuums
200 CFM, 130" lift
Power cord
50' twist-lock
Performance
Solution Pump220 PSI diaphragm demand pump, 1.35 GPM
Vacuum MotorsDual 3-stage low-amp, 200 CFM, 130" water lift
HeaterNone (unheated)
Capacity
Solution Tank10 gal (37.9 L)
Recovery Tank10 gal
Package
Hose8100 hose set: 25' vacuum and solution hose combo, 1.5" vacuum hose, 0.25" solution hose
Wand8300-EZ 12" dual jet stainless steel wand
Cleaning Path12"
DescalerSystem Maintainer, 1 gal
Electrical
Power CordSingle 50' (15.2 m) 12/3 twist-lock, detachable
Amp Draw20 A at 115 V
Build
BodyRoto-molded polyethylene
Wheels10" foam-filled non-marking rear, 4" locking front casters, built-in loading wheels
Dimensions (extractor)28" x 19" x 40" (71 x 48 x 102 cm)
Weight (extractor)104 lb (47 kg)
Model and use
Model No.2005CS
SeriesContractor's Special
UsesResidential and commercial carpet cleaning, hard-surface extraction
In the box (6)
×1Mytee 2005CS carpet extractor
×1Detachable 50' 12/3 twist-lock power cord
×18100 25' vacuum and solution hose combo (1.5" vacuum hose)
×18300-EZ 12" dual jet stainless steel wand
×1System Maintainer extractor descaler, 1 gal
×12" to 1.5" Cuff-Lynx reducer