Mytee A155 50′ Solution Hose for Water Hog
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Recent
Popular searches
Recent
Popular searches
+1 (307) 429-4122
support@mycleansupplies.com
Mon-Fri: 9am - 5pm (EST)
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
The A155 coiled as it ships: 50' of black 1/4" ID hose, printed with its 3,000 PSI rating, with a brass fitting on each end.
Fifty feet lets the Water Hog work where it is needed while the hose runs back to a tap. Check the distance from your usual water source to where the machine works before you buy, and add a garden hose if you need more reach.
The supply end of the A155: a brass female 3/4" garden hose fitting on the 1/4" hose, with a sleeve where the hose meets the fitting.
Screw your garden hose onto this end. It is a standard 3/4" garden hose thread, so a normal outdoor tap and an ordinary garden hose are all you need to feed the Water Hog's auto-fill while it works.
The machine end: a brass female quick disconnect that snaps onto the male quick disconnect on the rear of the Water Hog.
A quick disconnect means no tools and no threading at the machine. Snap it on to start auto-fill and pull the collar back to release it when the job is done. Both end fittings on the A155 are brass, and the hose is rated to 3,000 PSI.
Got Questions?
Find answers below or contact our support team.
Auto-filling the Mytee Water Hog from a garden hose.
Your garden hose screws onto the female 3/4" fitting, and the female quick disconnect snaps onto the male quick disconnect on the rear of the Water Hog.
50', with a 1/4" interior diameter.
3,000 PSI maximum water pressure.
Mytee covers it for 1 year on parts and labor.
Proud to Have Served















































