The Nantucket Sinks AW-PS-3219-16 is a 32" All Weather prep station sink in 316 marine-grade stainless steel, made for outdoor kitchens: a single 30" x 16" undermount bowl with a ledge that holds the included HDPE cutting board. It suits a backyard grill island, a pool house or a patio bar where an ordinary sink would be exposed to the weather, and it fits a 33" sink base.
All Weather (AW) sinks are constructed from 316 marine-grade stainless steel, which makes them highly resistant to corrosion and suited to outdoor use. Whether it is installed in a backyard kitchen, a grill station or a patio bar, Nantucket builds this sink to handle the elements year round, so you can prep and clean up where you cook instead of carrying everything indoors.
The bowl walls carry a ledge for the included CB-SR44 HDPE cutting board, which Nantucket's spec sheet sizes at 16.75" x 11.75": set it over the sink for added prep space, trim meat or vegetables, and rinse straight into the bowl. Small radius corners make the basin easy to clean, the stainless bottom grid protects the floor, the drain sits at the rear, and the 16-gauge steel is undercoated to reduce condensation and padded with rubber to reduce noise.
Fitting the AW-PS-3219-16 in Your Kitchen
Sizing is straightforward. The AW-PS-3219-16 measures 32" x 19" x 10" overall. As an undermount sink it is installed beneath a solid surface countertop such as granite or quartz, and the fabricator can finish the edge flush with the bowl or with the 1/4" overhang Nantucket recommends. There are no faucet holes in the sink, so the faucet is planned separately, either through the countertop or on the wall. Nantucket's installation guide calls for professional installation. The Undermount installation guide in Resources covers the cutout and mounting.
The All-Weather Outdoor Range
The AW-PS-3219-16 is part of the All-Weather Collection, which Nantucket created following the desire to move living spaces outdoors. Nantucket offers matching accessories, and the optional pieces listed for the AW-PS-3219-16 are the NS35LCC flip-top crumb cup drain.
Caring for the Stainless Steel
Nantucket's care guide for its stainless sinks favors light, frequent cleaning over an occasional heavy scrub: wipe with a soft cloth and a mild cleaner in the direction of the grain, towel dry after use to keep the steel shiny and free of water spots, and lift mineral deposits with vinegar and water. For tougher stains it suggests a mild abrasive such as Bar Keepers Friend, and it asks you to avoid steel wool and bleach, to wipe up salt, vinegar, citrus and other acidic foods promptly, and not to leave steel or cast iron cookware, wet sponges or soap bars sitting in the sink.
In short, the Nantucket Sinks AW-PS-3219-16 is a 32" outdoor workstation sink that brings a 316 marine-grade workstation sink with an HDPE board to an outdoor kitchen.
Features
32" Outdoor Workstation
At 32" x 19" x 10" overall with a 30" x 16" bowl, it fits a 33" outdoor sink base and gives room to rinse grill grates and platters.
Board, Grid and Drain Included
A basket strainer drain, the bottom grid and the CB-SR44 cutting board ship with the sink, so the outdoor kitchen is equipped as soon as it is plumbed.
316 Marine-Grade Stainless
316 stainless steel is the marine grade Nantucket uses for its All Weather line because it is highly resistant to corrosion, which is what an outdoor sink exposed to rain, sun and humidity needs.
HDPE Board on the Ledge
The included CB-SR44 HDPE cutting board sits on the sink ledge for extra prep space at the grill, and HDPE is a plastic that shrugs off moisture outdoors.
Thick 16-Gauge 304 Steel
The sink is fabricated from 16-gauge 304 stainless steel, the premium gauge Nantucket uses across its Pro Series sinks, here in a brushed satin finish.
Grid Protects the Basin
The stainless bottom grid lifts grill racks and pans off the bowl floor, protecting the finish from scratches and letting water drain beneath them.
Undercoated and Padded
An undercoating reduces condensation inside the outdoor cabinet, and rubber padding cuts the noise of running water and dropped tongs.
Small Radius Corners
Small radius corners keep the crisp lines of a professional sink but leave a slight curve at the base that a sponge can follow, which Nantucket notes makes cleaning easier.
Specifications
-
Model: AW-PS-3219-16
-
Collection: All Weather
-
Material: 16-gauge 316 marine-grade stainless steel
-
Finish: Brushed satin
-
Mount: Undermount
-
Bowls: Single
-
Shape: Rectangle
-
Exterior Dimensions: 32" x 19" x 10"
-
Interior Dimensions: 30" x 16"
-
Bowl Depth: 9.685"
-
Faucet Holes: None
-
Overflow: No
-
Drain Opening: 3.5"
-
Drain Position: Rear
-
Drain Included: Yes
-
Minimum Cabinet: 33"
-
Bottom Grid: Included
-
Weight: 41 lbs
-
Country of Origin: China
-
Warranty: Limited lifetime (residential)
-
California Prop 65: Warning: contains Nickel Compounds, chemicals listed under California Proposition 65. See www.P65Warnings.ca.gov.
What's Included
- AW-PS-3219-16 sink
- Basket strainer drain
- Bottom grid
- Cutting board
Sold separately: NS35LCC flip-top crumb cup drain.
Installation & Care
Installation
This is an undermount sink: it hangs beneath a solid surface countertop such as granite or quartz, which Nantucket specifies for its undermount stainless sinks, and it fits a 33" minimum sink base cabinet. Nantucket's installation guide calls for professional installation; give the countertop fabricator the installation guide and follow local building and plumbing codes. The guide has the fabricator mark the cutout from a template, cut on the inside of the line, and finish the counter flush with the bowl or overhanging it by 1/8" to 1/4"; Nantucket recommends a 1/4" overhang, which gives a clean edge and hides the silicone. Clips are spaced evenly around the sink, set loosely, adjusted, then tightened. Silicone sealant is not included. There are no faucet holes, so the faucet mounts on the countertop, and the sink needs a standard 3.5" drain at the rear. The Undermount installation guide is in Resources.
Care
Clean the sink often rather than saving it for a heavy scrub: a soft non-abrasive cloth and a mild cleaner, wiped with the direction of the grain, then a towel dry after use to keep it shiny and free of water spots. For tougher stains use a mild abrasive such as Bar Keepers Friend, and remove mineral deposits with vinegar and water. Never use steel wool or bleach, do not leave cleaners in the bowl overnight or wet sponges and soap bars on the steel, wipe up salt, vinegar, citrus and other acidic foods promptly, and do not leave steel or cast iron cookware sitting in the sink. For the included cutting board: hand wash it with soapy water right after use, rinse and dry it, and do not soak it or put it in the dishwasher, where high heat can warp it.
Resources
Shipping, Returns & Warranty
Nantucket Sinks ships this item by UPS or FedEx from North Kingstown, Rhode Island, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused Nantucket Sinks products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. Returns carry Nantucket Sinks' 25% restocking fee, you pay the return shipping, and the return travels at your risk, so pack it as it arrived. Payment processing fees are not refunded. Installed, used or damaged products, and discontinued models, can't be returned.
Nantucket Sinks backs its stainless steel sinks with a limited lifetime warranty: it replaces, at its option, any sink found to have a material defect, for a lifetime of residential use. Faucets and component parts are not covered, and an undermount sink must be installed in a solid surface countertop. The warranty covers residential installations for the original purchaser; installation, labor and transportation costs, and damage from installation, improper cleaning, misuse or neglect, are not covered.
Warranty claims. Email Nantucket Sinks at info@nantucketsinksusa.com with the date and place of purchase and installation, the model number, a description of the defect and photos of it. Nantucket Sinks may inspect the product and the installation before it decides on a replacement or adjustment. Contact us with your order number if you would like help with the claim.
About Nantucket Sinks
Nantucket Sinks is a boutique sink maker based in North Kingstown, Rhode Island, that has designed kitchen and bath sinks for more than two decades. Its range of over 500 products brings together fireclay, stainless steel, granite composite, vitreous china, cast iron and hand-hammered metals sourced from skilled makers in Italy, China and beyond, styled with the charm of the New England coast.
The All Weather Collection takes Nantucket Sinks' stainless designs outdoors. Each model is fabricated from 16-gauge 316 marine-grade stainless steel, the alloy chosen for its resistance to corrosion in year-round outdoor use. The lineup covers compact square and rectangular bar sinks, larger kitchen bowls, a drop-in model and a Prep Station with a fitted cutting board, each shipped with a bottom grid and drain, for backyard kitchens, grill islands and patio bars.
