The Nantucket Sinks Brightwork Hand-Hammered Trough Dual-Mount Stainless Steel Bathroom Sink comes in 2 versions: 19.8" or 23.75" size. Pick your options above to open the exact model, with its own price and details. The details below are for the 19.8" version.
The Nantucket Sinks TRS is a 19.8" x 12.8" hand-hammered stainless steel trough bathroom sink from the Brightwork collection, polished and made without an overflow. Its mount columns list it for undermount or overmount installation of the slim 17.8" x 10.5" trough.
Overall the TRS measures 19.8" x 12.8" x 4.375" and weighs 6 lbs. The TRS-OF is the same trough design in a slightly larger 20.25" x 13.25" size with an overflow, and the TRS-SM offers it with a lighter hammered texture.
Nantucket calls it an elegant handcrafted trough with hand hammering detail in sparkling stainless steel. Because each sink is made by hand, every one is slightly different from the next, and the hammering creates highs and lows that catch the light for a truly artistic finish. The basin is 4" deep, a slim trough profile that keeps the sink low and wide for hand washing, and it takes a standard 1.5" lavatory drain.
The sink is crafted from 304 stainless steel in 18-gauge. It will naturally oxidize if left untreated, but a quick polish brings back its luster. Dimensions are nominal, with slight variations of up to 1/4", and it fits a 22" minimum vanity cabinet.
Installing the TRS Troughs
Nantucket's undermount guide asks the fabricator to follow it and local building and plumbing codes, to space the clips evenly around the sink, loosely tighten, adjust and then tighten them, and to cut the counter flush or with a 1/8" to 1/4" overhang; a 1/4" overhang is recommended because it hides the silicone, which is not included. Because the troughs are handmade with nominal dimensions, measure the actual trough before the countertop is cut.
Brightwork is Nantucket's curated assortment of specialty metal sinks, inspired by the brightwork on sailboats; like sunlight sparkling on the ocean on a clear day, the brand says, these pieces bring brilliance to a bath, bar or kitchen. The collection works in hand-hammered stainless steel, brass and copper, in round, square, oval, rectangular and trough bath and bar sinks, plus kitchen sinks, a farmhouse apron and the Steppe two-tier sink, so a home can repeat one metal from the powder room to the kitchen.
Caring for Hammered Stainless Steel
Care for the TRS or TRS-OF follows Nantucket's hammered stainless guide: clean regularly with a non-abrasive cloth and a mild, bleach-free soap such as original Dawn, towel dry after every use to prevent water spots, and never use steel wool. For a deeper clean the brand recommends Flitz Polish Paste or a liquid metal polish, followed by Flitz Faucet Wax Plus to protect the surface, and it asks owners to keep cleaners other than mild soap and water off the steel and to rinse away grooming products, wine, fruit acid and ketchup.
The TRS is the Nantucket Sinks 19.8" hammered stainless trough bathroom sink for a modern vanity, in 304 stainless steel with the option of an undermount or an overmount.
Features
Under or Over the Counter
The TRS's 4.375" tall body can be undermounted or overmounted, and because each hand-hammered basin is unique, Nantucket's Brightwork guide has the installer trace the rim for the cutout.
No Overflow, Clean Interior
Without an overflow opening, the hammered trough interior is uninterrupted; pair it with a 1.5" lavatory drain made for sinks without an overflow.
Hand-Hammered Trough
The long rectangular trough is hammered by hand, so highs and lows across the bowl catch the light and give each sink its own artistic finish.
304 Stainless, 18-Gauge
Crafted from 304 stainless steel in 18-gauge, the trough is made by hand, and a quick polish restores the shine when it dulls.
Standard 1.5" Lavatory Drain
The 1.5" center opening takes a standard lavatory drain, so no special parts are needed to plumb the trough into a typical vanity.
Handmade, Nominal Dimensions
Each trough is made by hand, so Nantucket lists its measurements as nominal and they can vary by up to 1/4". Measure the actual sink before the countertop is cut so the opening fits your piece exactly.
Specifications
-
Model: TRS
-
Collection: Brightwork
-
Material: 18-gauge 304 stainless steel
-
Finish: Polished, hand hammered
-
Mount: Dual-mount (undermount or top mount)
-
Bowls: Single
-
Shape: Rectangle
-
Exterior Dimensions: 19.8" x 12.8" x 4.375"
-
Interior Dimensions: 17.8" x 10.5" x 4"
-
Bowl Depth: 4"
-
Faucet Holes: None
-
Overflow: No
-
Drain Opening: 1.5"
-
Drain Position: Center
-
Drain Included: No, sold separately
-
Minimum Cabinet: 22"
-
Weight: 6 lbs
-
Country of Origin: India
-
Warranty: Limited lifetime (residential)
-
California Prop 65: Warning: contains Nickel Compounds, chemicals listed under California Proposition 65. See www.P65Warnings.ca.gov.
What's Included
Installation & Care
Installation
The TRS can be undermounted or top mounted (overmounted). Nantucket's installation guide calls for professional installation, and its undermount guide asks for clips spaced evenly around the sink, a flush edge or a 1/8" to 1/4" overhang (1/4" is recommended to hide the silicone) and work to local building and plumbing codes; silicone sealant is not included. For a top mount, seal the rim to the counter with silicone. Because the sink is handmade and its dimensions are nominal, measure the actual sink before the countertop is cut. It fits a 22" minimum vanity cabinet. There are no faucet holes, so the faucet mounts on the countertop or the wall. The 1.5" center opening takes a standard lavatory drain without overflow, sold separately. The Undermount installation guide is in Resources.
Care
Clean regularly with a non-abrasive cloth and a mild, bleach-free soap such as original Dawn, and towel dry after every use to prevent water spots. Never use steel wool. For a deeper clean, Nantucket recommends Flitz Polish Paste or a liquid metal polish, then Flitz Faucet Wax Plus to protect the surface. Keep cleaners other than mild soap and water off the steel, and rinse away face cleansers, toothpaste, grooming products, wine, fruit acid and ketchup, which alter the finish.
Resources
Shipping, Returns & Warranty
Nantucket Sinks ships this item by UPS or FedEx from North Kingstown, Rhode Island, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused Nantucket Sinks products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. Returns carry Nantucket Sinks' 25% restocking fee, you pay the return shipping, and the return travels at your risk, so pack it as it arrived. Payment processing fees are not refunded. Installed, used or damaged products, and discontinued models, can't be returned.
Nantucket Sinks backs its stainless steel sinks with a limited lifetime warranty: it replaces, at its option, any sink found to have a material defect, for a lifetime of residential use. Faucets and component parts are not covered, and an undermount sink must be installed in a solid surface countertop. The warranty covers residential installations for the original purchaser; installation, labor and transportation costs, and damage from installation, improper cleaning, misuse or neglect, are not covered.
Warranty claims. Email Nantucket Sinks at info@nantucketsinksusa.com with the date and place of purchase and installation, the model number, a description of the defect and photos of it. Nantucket Sinks may inspect the product and the installation before it decides on a replacement or adjustment. Contact us with your order number if you would like help with the claim.
About Nantucket Sinks
Nantucket Sinks is a boutique sink maker based in North Kingstown, Rhode Island, that has designed kitchen and bath sinks for more than two decades. Its range of over 500 products brings together fireclay, stainless steel, granite composite, vitreous china, cast iron and hand-hammered metals sourced from skilled makers in Italy, China and beyond, styled with the charm of the New England coast.
Brightwork is Nantucket Sinks' collection of specialty metal sinks, named for the polished metal trim on a sailboat. Most pieces are hand hammered by artisans, so the dimpled surface catches the light and no two are exactly alike. In stainless steel the collection covers round, oval, square and trough-style bath and bar sinks plus kitchen bowls, prep stations and a farmhouse apron; in copper it adds a hammered prep station and the Steppe two-tier sink designed with Studio Dearborn.
