The Nantucket Sinks Pro Series Small Radius Single Bowl Undermount Stainless Steel Kitchen Sink comes in 5 versions: sizes from 23" to 36". Pick your options above to open the exact model, with its own price and details. The details below are for the 23" version.
The Nantucket Sinks SR2318-16 is a 23" Pro Series small radius undermount sink with a single 21" x 16" bowl, 10" deep. It fits a 24" cabinet base, which makes it a full-depth main sink for a compact kitchen, a condo or an ADU, or a generous prep sink in a larger kitchen. A BG-SR2318 bottom grid and the NS35CD colander drain are included.
Rounded small radius corners give additional space in the bowl and a fresh, modern industrial look, and channel grooves in the bottom divert water to the centered 3.5" drain for proper drainage. The basin easily takes a full load of dishes, so a narrow sink run does not mean a shallow, splashy bowl.
Nantucket fabricates the sink from premium 16-gauge T-304 stainless steel for durability and says its Pro Series sinks are at home in both traditional and modern kitchens. Thick rubber dampening pads quiet running water and dropped utensils, and the underside is sprayed with insulation to reduce condensation inside the cabinet. Nantucket's finishing process helps keep the steel corrosion resistant to rust and oxidation, and the brushed satin finish keeps daily maintenance to a simple rinse.
Fitting the SR2318-16 in Your Kitchen
Sizing is straightforward. The SR2318-16 measures 23" x 18" overall. As an undermount sink it is installed beneath a solid surface countertop such as granite or quartz, and the fabricator can finish the edge flush with the bowl or with the 1/4" overhang Nantucket recommends. There are no faucet holes in the sink, so the faucet is planned separately, either through the countertop or on the wall. Nantucket's installation guide calls for professional installation. The Undermount installation guide in Resources covers the cutout and mounting.
Pro Series Sizes and Accessories
The SR2318-16 is part of Nantucket's Pro Series, which Nantucket created following the trend for industrial style kitchens in the home, with small radius (SR) or zero radius (ZR) corners on every model and a range that runs from bar and prep bowls to large, deep single bowls. Single bowl sizes run from the 15" SR1815, ZR1815 and SR1515 bar sinks through the 23" SR2318-16, 28" ZR2818-16, 30" SR3018, 32" SR3218-16, SR3219-16 and ZR3219-16 to the 36" SR3618-16, with depth variants such as the 8" ZR2818-8-16, the 12" SR3018-12-16 and the 5.5" SS-PRO-ZR3018-5.5. Nantucket offers accessories to complete its Pro Series sinks, and the optional pieces listed for the SR2318-16 are the NS35LCC flip-top crumb cup drain and Deluxe Colander 16.
Caring for the Stainless Steel
Nantucket's care guide for its stainless sinks favors light, frequent cleaning over an occasional heavy scrub: wipe with a soft cloth and a mild cleaner in the direction of the grain, towel dry after use to keep the steel shiny and free of water spots, and lift mineral deposits with vinegar and water. For tougher stains it suggests a mild abrasive such as Bar Keepers Friend, and it asks you to avoid steel wool and bleach, to wipe up salt, vinegar, citrus and other acidic foods promptly, and not to leave steel or cast iron cookware, wet sponges or soap bars sitting in the sink.
In short, the Nantucket Sinks SR2318-16 is a 23" stainless steel undermount kitchen sink that fits a full-depth single bowl into a compact kitchen.
Features
Fits a 24" Cabinet Base
At 23" x 18" overall, the sink needs only a 24" minimum base, freeing cabinet width in a small kitchen for a dishwasher or drawers.
BG-SR2318 Grid Included
The BG-SR2318 bottom grid, 20.625" x 15.75" x 1", covers the bowl floor to protect it from scratches, and the NS35CD colander drain catches scraps.
Channel-Grooved Floor
Grooves pressed into the bottom of the sink divert water to the drain, for proper drainage, as Nantucket describes it, so rinse water is directed to the opening.
Premium 16-Gauge T-304 Steel
The sink is fabricated from 16-gauge T-304 stainless steel, a premium gauge Nantucket chose for maximum durability in a sink that works every day.
Quieter, Drier Cabinet
Thick rubber dampening pads cut the hollow ring of running water and clattering dishes, and a sprayed insulation layer reduces the condensation that can drip onto items stored in the cabinet.
Easy-Care Brushed Satin
Nantucket says the brushed satin finish makes daily maintenance a simple rinse; the even grain gives a low-glare look, and a towel dry keeps water spots off.
Small Radius Corners
Small radius corners keep the crisp lines of a professional sink but leave a slight curve at the base that a sponge can follow, which Nantucket notes makes cleaning easier.
Specifications
-
Model: SR2318-16
-
Collection: Pro Series
-
Material: 16-gauge 304 stainless steel
-
Finish: Brushed satin
-
Mount: Undermount
-
Bowls: Single
-
Shape: Rectangle
-
Exterior Dimensions: 23" x 18"
-
Interior Dimensions: 21" x 16"
-
Bowl Depth: 10"
-
Faucet Holes: None
-
Overflow: No
-
Drain Opening: 3.5"
-
Drain Position: Center
-
Drain Included: Yes
-
Minimum Cabinet: 24"
-
Bottom Grid: Included
-
Weight: 26 lbs
-
Country of Origin: China
-
Warranty: Limited lifetime (residential)
-
California Prop 65: Warning: contains Lead, Di(2-ethylhexyl)phthalate (DEHP), Nickel Compounds, chemicals listed under California Proposition 65. See www.P65Warnings.ca.gov.
What's Included
- SR2318-16 sink
- NS35CD colander drain
- BG-SR2318 bottom grid
Sold separately: NS35LCC flip-top crumb cup drain, Deluxe Colander 16.
Installation & Care
Installation
This is an undermount sink: it hangs beneath a solid surface countertop such as granite or quartz, which Nantucket specifies for its undermount stainless sinks, and it fits a 24" minimum sink base cabinet. Nantucket's installation guide calls for professional installation; give the countertop fabricator the installation guide and follow local building and plumbing codes. The guide has the fabricator mark the cutout from a template, cut on the inside of the line, and finish the counter flush with the bowl or overhanging it by 1/8" to 1/4"; Nantucket recommends a 1/4" overhang, which gives a clean edge and hides the silicone. Clips are spaced evenly around the sink, set loosely, adjusted, then tightened. Silicone sealant is not included. There are no faucet holes, so the faucet mounts on the countertop, and the sink needs a standard 3.5" drain at the center of the bowl. The Undermount installation guide is in Resources.
Care
Clean the sink often rather than saving it for a heavy scrub: a soft non-abrasive cloth and a mild cleaner, wiped with the direction of the grain, then a towel dry after use to keep it shiny and free of water spots. For tougher stains use a mild abrasive such as Bar Keepers Friend, and remove mineral deposits with vinegar and water. Never use steel wool or bleach, do not leave cleaners in the bowl overnight or wet sponges and soap bars on the steel, wipe up salt, vinegar, citrus and other acidic foods promptly, and do not leave steel or cast iron cookware sitting in the sink.
Resources
Shipping, Returns & Warranty
Nantucket Sinks ships this item by UPS or FedEx from North Kingstown, Rhode Island, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused Nantucket Sinks products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. Returns carry Nantucket Sinks' 25% restocking fee, you pay the return shipping, and the return travels at your risk, so pack it as it arrived. Payment processing fees are not refunded. Installed, used or damaged products, and discontinued models, can't be returned.
Nantucket Sinks backs its stainless steel sinks with a limited lifetime warranty: it replaces, at its option, any sink found to have a material defect, for a lifetime of residential use. Faucets and component parts are not covered, and an undermount sink must be installed in a solid surface countertop. The warranty covers residential installations for the original purchaser; installation, labor and transportation costs, and damage from installation, improper cleaning, misuse or neglect, are not covered.
Warranty claims. Email Nantucket Sinks at info@nantucketsinksusa.com with the date and place of purchase and installation, the model number, a description of the defect and photos of it. Nantucket Sinks may inspect the product and the installation before it decides on a replacement or adjustment. Contact us with your order number if you would like help with the claim.
About Nantucket Sinks
Nantucket Sinks is a boutique sink maker based in North Kingstown, Rhode Island, that has designed kitchen and bath sinks for more than two decades. Its range of over 500 products brings together fireclay, stainless steel, granite composite, vitreous china, cast iron and hand-hammered metals sourced from skilled makers in Italy, China and beyond, styled with the charm of the New England coast.
The Pro Series is Nantucket Sinks' line of fabricated 16-gauge 304 stainless steel sinks with a clean, industrial look. Every model has small radius (SR) or zero radius (ZR) corners, rubber sound pads, an anti-condensation undercoating and a basin floor beveled toward the drain. The range runs from compact bar and prep bowls through standard single and double bowls, laundry-depth basins, apron-front farmhouse sinks and the Prep Station workstation models with tiered ledges for fitted accessories, so a whole home can be outfitted in one consistent style.
