Novatek Novair 1000 Replacement HEPA Filter
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
Recent
Popular searches
Recent
Popular searches
+1 (307) 429-4122
support@mycleansupplies.com
Mon-Fri: 9am - 5pm (EST)
Product support & personalised quotes
Monday to Friday 9:00AM to 5:00PM EST
In a Novair air scrubber, room air passes a pre-filter pad and a two-ply ring filter before it reaches the HEPA filter, the last and finest of three stages. This 16" x 16" filter is 11.5" deep, which gives the pleated media a large area to load across before airflow suffers.
Since the cheaper pre-filters take the bulk of the dust, the HEPA filter is the part you change least often, and the one that decides what the machine returns to the room. Changing pre-filters on time is the simplest way to stretch each HEPA filter's working life.
Alongside the wood frame and metal frame filters, Novatek offers a high-capacity build at this size: a metal mini-pleat filter, part F4032, 16" x 16" x 11.5", the HEPA filter the Novair 1000 Variable Speed manual lists for that machine.
It shares the outside dimensions of the standard filters, so a crew can step up a grade on a sensitive job without changing machines or brackets. Check the filter opening on your Novair before ordering; the Novair 700 takes a thinner filter with the same face size.
Got Questions?
Find answers below or contact our support team.
The Novair 2000 and Novair 2000 Bio take 24" x 24" HEPA filters. The Novair 1000 and Novair 1000 Variable Speed take 16" x 16" HEPA filters. The Novair 700 uses a thinner 16" x 16" x 3" filter, which is a different part.
Novatek rates its wood frame HEPA filters at 99.97% at 0.3 microns and its metal frame HEPA filters at 99.99% at 0.3 microns. The metal mini-pleat (part F4032) is the high-capacity design at this size.
The filter has a gasket on one side only. Insert it gasket side first and press it firmly against the housing's internal rib, then secure the retaining brackets.
Change the cheaper pre-filters first. If the machine's pressure gauge still reads high or airflow stays low with fresh pre-filters, the HEPA filter is loaded and should be replaced. Inspect the new filter's gasket for gaps or cracks before fitting it.
Proud to Have Served















































