The ANZZI L-AZ904MB-BG Contemporary is a single hole vessel sink faucet in matte black and brushed gold, 9.41" tall with a high arc spout and a 1.2 GPM water-saving aerator. Its bold, minimalist design has sharp angles and crisp lines, and the high arc spout is made for larger sinks, delivering a strong flow that will not splash out of the sink.
9.41" Tall With a 6.34" Reach
The faucet is 9.41" high, with the spout at 8.62" high, 8.16" long and a 6.34" reach. It installs through a single hole for a clean, uncluttered look, and a single lever handle gives instant control of water volume and temperature.
The 1.2 GPM water-saving aerator uses less water while still delivering a strong flow. The faucet is built in durable RHINO-ALLOY certified brass, and the installation manual marks it lead free and certified to NSF/ANSI/CAN 61.
A pop-up drain without an overflow hole is included, so the faucet is ready to install out of the box, and the 3/8" connection fits most common water lines.
For a vessel sink that needs a tall single hole faucet, the L-AZ904MB-BG is an ANZZI 9.41" vessel sink faucet in matte black and brushed gold, with a 6.34" reach, a 1.2 GPM aerator, lead-free brass and a pop-up drain in the box.
Features
Matte Black-Brushed Gold Finish
This Contemporary model is finished in Matte Black-Brushed Gold, and the same faucet also comes in Brushed Nickel (L-AZ904BN), Matte Black (L-AZ904MB), Matte Black-Brushed Nickel (L-AZ904MB-BN) and Matte Black-Polished Chrome (L-AZ904MB-CH).
9.41" High Arc Spout
The faucet is 9.41" tall, with the spout 8.62" high, and the high arc spout is made for larger sinks.
6.34" Spout Reach
The spout is 8.16" long with a 6.34" reach, delivering a strong flow that will not splash out of the sink.
1.2 GPM Water-Saving Aerator
A 1.2 GPM water-saving aerator is fitted, using less water while still delivering a strong flow.
Single Lever, Single Hole
One lever handle controls water volume and temperature, and the faucet mounts through a single hole for an uncluttered, minimalist look.
Durable Brass Construction
The Contemporary is built in durable RHINO-ALLOY certified brass, marked lead free and certified to NSF/ANSI/CAN 61 in its installation manual.
Pop-Up Drain Included
A pop-up drain without an overflow hole is included, so the faucet is ready to install out of the box.
Professional Installation Recommended
ANZZI's page highly recommends professional installation, and its manual asks for supply stops and 20 to 125 PSI water pressure first.
3/8" Connection
The 3/8" compression connection fits most common water lines, and water pressure must be between 20 and 125 PSI.
Specifications
-
Model: L-AZ904MB-BG
-
Faucet Height: 9.41"
-
Spout Height: 8.62"
-
Spout Length: 8.16"
-
Spout Reach: 6.34"
-
Material: Brass (ANZZI RHINO-ALLOY certified)
-
Finish: Matte Black-Brushed Gold
-
Mounting: Deck mount, single hole
-
Handles: Single lever
-
Flow Rate: 1.2 GPM
-
Supply Connection: 3/8" compression
-
Mounting Hole: 1.3" to 1.38"
-
Water Pressure: 20 to 125 PSI
-
Drain: Pop-up drain without overflow hole, included
-
Certifications: Lead free, NSF/ANSI/CAN 61
-
Series: Contemporary
-
Warranty: Limited lifetime (register within 90 days)
What's Included
- L-AZ904MB-BG Contemporary single hole vessel sink faucet in matte black and brushed gold
- Hot and cold braided supply hoses
- Rubber gasket, metal gasket and mounting kit
- Aerator and aerator key
- Pop-up drain without overflow hole
Sold separately: Supply valves
Installation & Care
Installation
Deck mount through a single 1.3" to 1.38" hole. Tools are a wrench and a screwdriver; check that all components are included, supply lines are free of debris with supply stops installed, and water pressure is between 20 and 125 PSI. Fit the faucet with its O-ring, slide up the rubber and metal gaskets and secure the mounting kit, hand tight then a screwdriver. With the supply valves (not provided) off, connect the red HOT and blue COLD braided hoses, hand tight then a wrench, without overtightening, and do not use pipe dope or other sealants on water connections. Install the pop-up drain, check for leaks, then remove the aerator and flush the lines at full flow for one minute. ANZZI highly recommends professional installation, and the manual says to contact a professional plumber if installation is difficult.
Care
To preserve the finish on the metal parts, apply a non-abrasive wax such as car wax, and rinse off any cleaner immediately. Clean the aerator regularly to remove calcium build-up and any blockages that could reduce the water flow.
Resources
Shipping, Returns & Warranty
ANZZI ships this item from the SW Corp warehouse by UPS, FedEx or USPS, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this product to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
About ANZZI
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
The Contemporary comes in Brushed Nickel (L-AZ904BN), Matte Black (L-AZ904MB) and two-tone Matte Black-Brushed Gold (L-AZ904MB-BG), Matte Black-Brushed Nickel (L-AZ904MB-BN) and Matte Black-Polished Chrome (L-AZ904MB-CH).
