The ANZZI SH-AZ037MK Mezzo Series is a single-handle tub and shower faucet set in matte black, with a 7.99" Heavy Rain shower head, a wall tub spout and the in-wall valve included. The valve, trim, shower head and tub spout come in one box.
The 7.99" round Heavy Rain head provides a powerful and deeply refreshing full body shower. The mixing lever sets flow and temperature in one movement, and a separate diverter knob on the trim sends water to the tub spout or up to the shower.
The tub spout has a 7.46" reach and an aerator. The shower is rated at 1.8 GPM.
ANZZI crafts the Mezzo with a lead-free RHINO ALLOY certified brass interior under a rust resistant matte black finish. Inside the wall, the valve body holds a cartridge and a check valve, and the set is listed to ASME A112.18.1/CSA B125.1 and cUPC certified for North America.
Installing the Valve and Trim
Installation follows ANZZI's guide. The valve goes in with its protective cover flush to the finished wall, the hot and cold supply lines connect to their matching sides, and you run the water for 1 to 2 minutes and check every connection for leaks before the wall is closed. Then the trim plate, diverter knob and mixing handle go on, and the shower arm and spout connector thread on with Teflon tape before the spout is attached.
Care for the matte black finish is simple: regular soap and warm water on a soft, non-abrasive cloth, then rinse and dry. Keep abrasive pads off the surface, test any stronger cleaner on an inconspicuous spot first and do not let it soak. The spout aerator unscrews with the included aerator wrench for cleaning. A single lever controls the set.
The box holds the shower arm and flange, the shower head, the valve body with its sleeve, cartridge and check valve, the trim plate, the mixing handle, the diverter knob, the tub spout with its connector and two set screws, the aerator, an Allen key, screws and O-rings. Have a screwdriver, channel locks, an adjustable wrench, goggles and Teflon tape ready, and fit the O-ring between the shower arm and the head.
The ANZZI SH-AZ037MK Mezzo single-handle tub and shower faucet set brings a 7.99" rain head, a diverter, a 7.46" reach aerated spout and the in-wall valve together in matte black. ANZZI lists the set as cUPC certified and to ASME A112.18.1/CSA B125.1.
Features
7.99" Heavy Rain Head
The 7.99" round Heavy Rain showerhead provides a powerful and deeply refreshing full body shower from its wall arm.
Diverter Knob for Tub or Shower
A dedicated diverter knob on the trim plate routes water between the tub spout and the shower head, separate from the lever.
Single Lever Mixing
One lever controls both volume and temperature, and a separate diverter knob on the trim plate sends water to the shower or the spout.
Aerated 7.46" Tub Spout
The tub spout reaches 7.46" from the wall and has an aerator, which unscrews with the included aerator wrench.
Valve Included
The rough-in valve body with its sleeve, cartridge and check valve comes in the box with the trim, head and spout.
Certified Lead-Free Brass
The lead-free RHINO ALLOY certified brass interior is listed to ASME A112.18.1/CSA B125.1 and is cUPC certified and listed for North America.
Matte Black Finish
Matte black is a rust resistant finish over the lead-free brass interior of the Mezzo set.
Specifications
-
Model: SH-AZ037MK
-
Material: Lead-free solid brass
-
Finish: Matte Black
-
Configuration: Tub and shower faucet set, wall mount
-
Handles: Single lever with separate diverter knob
-
Shower Head: Heavy Rain, 7.99" diameter, 1 spray
-
Tub Spout Reach: 7.46"
-
Flow Rate: 1.8 GPM
-
Rough-In Valve: Included, with check valve
-
Certifications: cUPC, ASME A112.18.1/CSA B125.1
-
Series: Mezzo
-
Warranty: Limited lifetime (register within 90 days)
What's Included
- SH-AZ037MK shower head
- Shower arm and flange
- Valve body with cartridge and check valve
- Mixing handle, diverter knob and trim plate
- Tub spout with aerator and connector
- Protective covers, screws, Allen key and aerator wrench
Installation & Care
Installation
Wall mount, valve included. Set the valve so its protective cover is flush with the finished wall, connect the hot and cold supply lines to the matching sides, run the water for 1 to 2 minutes and check every connection for leaks before closing the wall. Fit the trim plate, diverter knob and mixing handle, thread the shower arm and spout connector with Teflon tape, then attach the spout.
Care
Wipe the matte black finish with regular soap, warm water and a soft, non-abrasive cloth, then rinse and dry. Avoid abrasive pads, powders and bleach cleaners on the surface, test any stronger product on a hidden area, never let cleaner soak, and clean the spout aerator with the supplied wrench when flow drops.
Resources
Shipping, Returns & Warranty
ANZZI ships this item from the SW Corp warehouse by UPS, FedEx or USPS, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused ANZZI products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, which for a freight item means the freight cost, and a 20% restocking fee is deducted along with payment processing fees. Installed, used or damaged products and special-order items can't be returned.
ANZZI warrants this product to the original purchaser against defects in materials and workmanship for its lifetime, for residential use, and replaces a defective product or part free of charge. Register it at anzzi.com/register within 90 days of delivery to activate the warranty, and report any surface damage within 5 days of delivery, before installation. Shipping, handling and labor costs, commercial use, improper installation or maintenance, misuse, hard-water or mineral deposits and corrosive cleaners are not covered.
Warranty claims. Call ANZZI at 1-844-442-6994 (1-844-44-ANZZI) with your proof of purchase to submit a claim and get a return authorization (RMA). Register the product at anzzi.com/register within 90 days of delivery, or the warranty is not active. Contact us with your order number if you would like help with the claim.
About ANZZI
ANZZI is a kitchen and bath brand from SW Corp, a Miami, Florida company that also makes SteamSpa and MediTub. It designs freestanding and walk-in bathtubs, shower doors and bases, faucets, sinks, toilets and kitchen fixtures, bringing European bath design to North American homes.
The Mezzo set comes in polished chrome (SH-AZ037), matte black (SH-AZ037MK) and oil rubbed bronze (SH-AZ039). ANZZI's Mesto set adds a two-spray head and the Meno set an 11.39" head for the same tub and shower layout.
