The Unger HydroPower Ultra 16K Entry Kit comes in 2 versions: 33' or 40' reach. Pick your options above to open the exact model, with its own price and details. The details below are for the 33' version.
The Unger HydroPower Ultra 16K Entry Kit 33' (C10KT) is a complete pure water window cleaning kit for professionals starting out with water fed pole work or adding a second rig. The Unger HydroPower Ultra 33' kit pairs the HydroPower Ultra DI tank (UHP01) with a 7 section nLITE Carbon 16K Telescopic Pole that extends to 33', a flagged 11" nLITE Power Brush and a DuroFlex hose, ready to clean glass with pure water and zero chemicals.
Zero TDS Water from the Ultra Tank
The HydroPower Ultra tank deionizes tap water through mixed bed ion exchange resin, so the water reaching the brush carries zero TDS. With no dissolved minerals left to dry on the glass, windows rinse spot free and streak free without detergent. The tank measures 14" x 13.1" x 12.3", weighs 21.9 lb and is built from aluminum and plastic in black and green, a compact size for the van.
The small tank takes one green Ultra Resin Pack. Watch the TDS reading on the tank, and when it reaches 10 ppm, change the pack. Unger's manual limits inflowing water to 86°F and operating pressure to 116 psi (8 bar).
A 7 Section Carbon 16K Pole
The nLITE Carbon 16K Telescopic Pole (C100T) is made of 100% carbon fiber for rigidity at low weight, and it handles well for reach and control. It extends in seven sections to 33' and weighs 5 lb, then collapses to 5.7' for transport and storage on the go. A rubber handle at the base improves grip and protects the pole base during long sessions on rough ground.
At the top, the pole's angle adapter fits all nLITE brushes and has a built in safety stop that prevents accidental separation. The kit's flagged nLITE Power Brush (NFF28) carries 11" of green nylon bristles to work dirt loose while pure water rinses it away, and the green DuroFlex hose (DLS25) runs pure water from the tank up to the brush.
Who the 33' Kit Suits
Unger recommends the kit for facility maintenance crews at schools, office parks and campuses, for residential and low rise commercial window cleaning teams, and for cleaning professionals who want to start or expand with a complete DI ready kit. Beyond windows, the same setup cleans panels and other smooth exterior surfaces. With tank, pole, brush and hose together, the Unger HydroPower Ultra 33' kit is ready for pure water cleaning from the ground.
Features
Complete DI Ready Kit
The kit brings together the HydroPower Ultra DI tank, a 33' carbon pole with angle adapter, an 11" brush and a DuroFlex hose. It is set up for professionals starting out with pure water cleaning.
Zero TDS Pure Water
The HydroPower Ultra tank deionizes tap water to zero TDS. Glass rinses spot free and streak free without chemicals.
100% Carbon Fiber Pole
The 7 section nLITE Carbon 16K pole is rigid yet easy to handle. At 5 lb it gives control at full 33' extension.
Collapses to 5.7'
Fully retracted, the pole measures 5.7'. It stores and travels easily in a van.
Angle Adapter with Safety Stop
The angle adapter fits all nLITE brushes. A built in safety stop prevents accidental separation at height.
Rubber Handle Grip
A rubber handle at the base gives a secure grip. It also protects the pole base on rough surfaces during extended use.
Flagged 11" Power Brush
The nLITE Power Brush (NFF28) has 11" of flagged nylon bristles. It scrubs the glass while pure water rinses.
Specifications
-
Brand: Unger
-
Model: C10KT
-
UPC: 761475673648
-
System type: Deionization (mixed bed DI resin) pure water kit
-
Pole reach: 33'
-
Pole (C100T): nLITE Carbon 16K Telescopic Pole, 7 sections, 100% carbon fiber, 396" (33') extended, 5.7' collapsed, 5 lb, black/green
-
Tank (UHP01): HydroPower Ultra, 14" L x 13.1" W x 12.3" H, 21.9 lb, aluminum/plastic, black/green
-
Resin: 1 green Ultra Resin Pack; replace at 10 ppm
-
Maximum operating pressure: 116 psi (8 bar)
-
Maximum water temperature: 86°F
-
Brush (NFF28): nLITE Power Brush, flagged, 11", nylon bristles, 1 lb, green
-
Hose (DLS25): DuroFlex, green, 984" (82')
-
Warranty: Unger Limited Lifetime Commercial Warranty (original purchaser, authorized reseller)
What's Included
- nLITE Carbon 16K Telescopic Pole (C100T) with angle adapter
- nLITE Power Brush, flagged (NFF28)
- DuroFlex Hose (DLS25)
- HydroPower Ultra DI tank (UHP01)
Installation & Care
Installation
Set the tank upright on a stable spot and check that the green Ultra Resin Pack is seated. Connect the DuroFlex hose to the Water OUT connection and the tap water supply to the Water IN connection, open the supply, and hold the yellow lever down with Water OUT open to bleed trapped air. Do not exceed 116 psi (8 bar). Extend the C100T pole section by section, fit the NFF28 brush to the angle adapter and run the hose up to the brush.
Care
Change the resin pack when the tank's TDS meter reads 10 ppm. Use only drinking (tap) water no warmer than 86°F, keep the tank away from heat sources and direct sunlight, and protect it from frost. Turn off the water supply when not in use, secure the tank in the vehicle for transport, and collapse the pole to 5.7' for storage.
Resources
Shipping, Returns & Warranty
You'll get tracking by email as soon as this item ships. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused Unger products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. You pay the return shipping, and a restocking fee of up to 20% may be deducted along with payment processing fees. Used items and special-order items can't be returned.
Unger covers this product with its Limited Lifetime Commercial Warranty for the original purchaser when it is bought from an authorized Unger reseller, as My Clean Supplies is. If the product has a defect in materials or workmanship, Unger will, at its option, replace or refund the product or the defective part free of charge. Unger defines lifetime as the reasonably expected useful life of the product under normal commercial use. Consumable items that need routine replacement, such as squeegee rubber, scraper blades, microfiber cloths, mop pads, resin, filters, membranes and cleaning solution, are not covered. Keep your proof of purchase.
About Unger
Unger was founded in 1964 by Henry Unger, a working window cleaner who set out to make the tools commercial cleaners use every day easier, more efficient and safer to work with. Unger Enterprises, LLC runs its US business from Bridgeport, Connecticut, and its professional range covers outdoor and indoor window cleaning, pure water window cleaning systems, dusting and high access cleaning, floor care and mopping, restroom cleaning and litter removal tools.
The 33' kit is the 7 section version of Unger's HydroPower Ultra 16K Entry Kits; the HydroPower Ultra 16K Entry Kit 40' uses a 9 section pole. The nLITE Carbon 16K Starter Kits at 33' and 40' cover the pole side alone, and the HydroPower Nano Pure Water System and Nano Complete Pro 39' and 55' Kits add a nano membrane stage ahead of the resin.
