Nantucket Sinks 19.5" Powder-Coated Iron Wall-Mount Bucket Utility Sink

The Nantucket Sinks 19.5" Powder-Coated Iron Wall-Mount Bucket Utility Sink comes in 5 versions: 4 colors and no overflow or with overflow. Pick your options above to open the exact model, with its own price and details. The details below are for the Black, No overflow version.

The Nantucket Sinks NS-ACBS20-BLKW is a 19.5" powder-coated iron wall-mount bucket sink without an overflow, with a black exterior and a white interior, from the Anchor Collection. Rustic and charming, it gives a laundry room, mud room, garage workspace or entryway a vintage utility sink that saves floor space because it hangs on the wall.

The bucket shape is the point. The 17" x 11.5" bowl is 6.25" deep, and Nantucket gave it a thoughtful, shorter backsplash, 4" high, which reduces the distance to the basin for less splashing when you rinse muddy boots, a paint brush or a pet bowl. Hung on the wall with the included hardware, it leaves the floor below open for a hamper, a basket or a mop bucket.

Each sink is made from 16-gauge iron with a powder-coated finish inside and out and a black PVC trim along the front edge. It is made by hand, so Nantucket gives every measurement a tolerance of plus or minus 1/2", and the vintage styling gives you functional utility and style in one piece. The 1.75" center drain opening takes a standard umbrella (bath) drain, which is sold separately along with the faucet.

Plan the wall before it goes up. The sink has no faucet holes, so a wall-mount faucet sits above the backsplash, and Nantucket's guide normally sets the front lip of the bowl at 34.5" from the floor, though local code decides the height. Nantucket describes the bucket shape as vintage styling that gives functional utility and style in one piece, and the hand-cut tolerance means the actual sink should be checked before the faucet and drain heights are set.

Installing the Anchor Bucket Sinks

Nantucket recommends professional installation to local code. Following the NS-ACBS20 guide, screws go through the sink's eyelets into wall studs on 16" centers and are finished with decorative screw covers, and the spec sheet shows two included screws. The non-overflow models take a standard lavatory umbrella drain without overflow; the overflow models need one with an integral overflow. Drain and faucet are sold separately.

The Anchor Collection is Nantucket's line of dependable, practical, vintage-inspired utility sinks for a bathroom, laundry room or mud room, wherever you will use it the most. It covers the 22" enameled cast iron wall-mount sinks, sold bare as the CI-2218WNRG or as the CI-2218-FBSET, CI-2218-FBMBLSET and CI-2218-FBSBSET sets with a drain, and the 19.5" powder-coated iron bucket sinks in white, yellow, black and pink, with or without an overflow.

Caring for a Powder-Coated Finish

The bucket sink is powder coated inside and out, so cleaning is about protecting the coating: mild soap, water and a soft cloth, then a rinse and a dry. Avoid abrasive pads, scouring powders and harsh or acidic cleaners, which can dull the finish, and wipe the black PVC edge trim with the same mild soap and water.

The NS-ACBS20-BLKW is the Nantucket Sinks 19.5" bucket utility sink in black and white, a vintage-style wall-mount sink without an overflow for a laundry room, mud room, garage or entryway that keeps the floor below free.

Features

Black Exterior, White Bowl
The NS-ACBS20-BLKW pairs a black powder-coated exterior with a white interior and a black PVC trim on the front edge, so the bowl stays bright while the outside brings color to the room.

No Overflow, Utility Ready
The NS-ACBS20-BLKW has no overflow, so it takes a 1.75" umbrella drain without overflow; it measures 19.5" x 13" x 10.325" overall and weighs 12 lbs.

Shorter 4" Backsplash
A 4" high backsplash brings the wall faucet closer to the basin, which Nantucket says helps reduce splashing in a busy laundry or mud room.

16-Gauge Powder-Coated Iron
The 16-gauge iron body is powder coated inside and out, a durable vintage-style finish with a black PVC trim protecting the front edge.

Wall-Mount, Hardware Included
The sink hangs on the wall with the included hardware, so it saves floor space and leaves room underneath for a basket or bucket.

Handmade, Plus or Minus 1/2"
Each sink is handmade, so measurements carry a tolerance of plus or minus 1/2"; check the actual sink before setting the faucet and drain heights.

Specifications

• Model: NS-ACBS20-BLKW
• Collection: Anchor Collection
• Material: 16-gauge iron
• Gauge: 16-gauge
• Finish: Powder coated
• Color: Black exterior and white interior
• Mount: Wall-mount
• Bowls: 1
• Exterior Dimensions: 19.5" x 13" x 10.325"
• Interior Dimensions: 17" x 11.5"
• Bowl Depth: 6.25"
• Faucet Holes: 0
• Overflow: No
• Drain Opening: 1.75"
• Drain Position: Center
• Drain Included: No
• Tolerance: +/- 0.5"
• Weight: 12 lbs
• Country of Origin: India
• Warranty: 5-year limited

What's Included

• NS-ACBS20-BLKW sink
• Wall-mounting hardware

Sold separately: 1.75" umbrella drain without overflow, wall-mount faucet.

Installation & Care

Installation
This bucket sink mounts on the wall, and the wall-mounting hardware is included. Nantucket recommends professional installation to local code. Following the NS-ACBS20 guide, screws go through the sink's eyelets into wall studs (16" on center) and are finished with decorative screw covers, and the front lip of the bowl is normally set 34.5" from the floor, though local code decides the height. The faucet mounts on the wall above the sink's 4" backsplash, since the sink has no faucet holes. The 1.75" center drain opening takes a standard lavatory umbrella drain without overflow, sold separately. The NS-ACBS20 installation guide is in Resources.

Care
Clean the powder-coated finish with mild soap, water and a soft cloth, then rinse and dry it. Avoid abrasive pads, scouring powders and harsh or acidic cleaners, which can dull or wear through the coating, and dry the bowl after use rather than leaving wet sponges or standing water in it. Wipe the black PVC edge trim with the same mild soap and water.

Resources

Shipping, Returns & Warranty

About Nantucket Sinks

Nantucket Sinks is a boutique sink maker based in North Kingstown, Rhode Island, that has designed kitchen and bath sinks for more than two decades. Its range of over 500 products brings together fireclay, stainless steel, granite composite, vitreous china, cast iron and hand-hammered metals sourced from skilled makers in Italy, China and beyond, styled with the charm of the New England coast.

The Anchor Collection is Nantucket Sinks' line of vintage-inspired utility sinks for laundry rooms, mud rooms, garages and powder rooms. It spans 22" enameled cast iron wall-mount sinks, sold bare or as sets with a drain, and smaller 20" powder-coated iron bucket sinks in several colors, with matching wall-mount faucets, grid drains and P-traps sold separately.