The Nantucket Sinks Hand Hammered Brass Trough Undermount Bathroom Sink with Overflow comes in 2 versions: 19.8" x 12.8" or 23.5" x 15.5" size. Pick your options above to open the exact model, with its own price and details. The details below are for the 19.8" x 12.8" version.
The Nantucket Sinks TRB-OF is a 19.8" x 12.8" hand-hammered brass trough undermount bathroom sink with an overflow, from the Brightwork collection. In polished, unlacquered brass, its long, narrow rectangle fits a standard vanity while bringing the warmth of handmade brass to a powder room or a primary bath with brass fixtures.
The 17.8" x 10.5" basin is 4" deep, a shallow trough shape that keeps the profile slim under the counter and still gives a wide, open area for hand washing. Overall the sink is 19.8" x 12.8" x 6" and weighs 9 lbs, and the TRB2416-OF is the larger 23.5" version of the same trough.
Each trough is handcrafted, so every sink is slightly different from the next, and Nantucket notes the welds are done by hand to give a truly artistic finish. Designed to be undermounted, the sink sits below the vanity top so the countertop edge frames a long rectangle of hammered brass, and a built-in overflow with a 1.5" center drain opening takes a standard lavatory drain.
The brass is unlacquered and polished, so patina is possible right away if it is not waxed immediately, and it will naturally patina if left untreated. Nantucket marks it as needing special care and maintenance, which means a carnauba wax coat before first use and every 6 months, mild soap and a hand dry after use. The dimensions are nominal, varying by up to 1/4".
Installing the TRB Brass Troughs
These brass troughs are designed to be undermounted, and Nantucket calls for professional installation. Because each sink is handmade, measure the actual trough before the vanity top is cut, and choose a standard lavatory drain made for an overflow sink. There are no faucet holes, so the faucet mounts on the countertop or the wall.
Brightwork is Nantucket's curated assortment of specialty metal sinks, inspired by the brightwork on sailboats; like sunlight sparkling on the ocean on a clear day, the brand says, these pieces bring brilliance to a bath, bar or kitchen. The collection works in hand-hammered stainless steel, brass and copper, in round, square, oval, rectangular and trough bath and bar sinks, plus kitchen sinks, a farmhouse apron and the Steppe two-tier sink, so a home can repeat one metal from the powder room to the kitchen.
Caring for Hand-Hammered Brass
Keeping the TRB-OF or TRB2416-OF bright is a short routine. Nantucket's brass care guide calls for a carnauba paste wax before first use and again every 6 months, a daily wash with a soft damp cloth and a little mild soap free of antibacterial or bleach additives, and a rinse and hand dry. Water spots and mineral deposits come off with Bar Keepers Friend or Brasso, while steel wool, scouring pads and sponges stay away from the finish, and face cleansers, toothpaste, wine and fruit acid should be rinsed off before they mark the metal.
The TRB-OF is the Nantucket Sinks 19.8" hammered brass trough bathroom sink for a standard vanity, in polished, unlacquered brass with hand-done welds and a built-in overflow.
Features
Slim 19.8" Trough Shape
The TRB-OF's 17.8" x 10.5" basin is long and narrow, so it suits a standard vanity depth while still giving a wide area for washing at the sink.
Polished Unlacquered Brass
The polished brass glows against the countertop, and because it is unlacquered it can be kept bright with wax or allowed to deepen into a natural patina.
Overflow Built In
A built-in overflow guards against an accidental fill to the rim, and the 1.5" center opening takes a standard lavatory drain made for an overflow sink.
Hand-Welded Brass
The brass is hand hammered and hand welded, so the seams and texture carry the maker's hand and no two troughs are exactly alike.
Unlacquered Brass, Natural Patina
The brass is left unlacquered, so it develops a natural patina over time if left untreated; Nantucket notes patina can begin right away unless the sink is waxed immediately, and a polish brings back the shine.
Undermount Clean Edge
Mounted beneath the countertop, the trough leaves a continuous vanity edge, so water wipes straight in and the brass reads as a framed, inset accent.
Specifications
-
Model: TRB-OF
-
Collection: Brightwork
-
Material: Unlacquered brass
-
Finish: Polished, hand hammered
-
Mount: Undermount
-
Shape: Rectangle
-
Bowls: 1
-
Exterior Dimensions: 19.8" x 12.8" x 6"
-
Interior Dimensions: 17.8" x 10.5"
-
Bowl Depth: 4"
-
Faucet Holes: 0
-
Overflow: Yes
-
Drain Opening: 1.5"
-
Drain Position: Center
-
Drain Included: No
-
Weight: 9 lbs
-
Country of Origin: India
-
Warranty: Limited lifetime (residential)
-
California Prop 65: Warning: contains Lead, Di(2-ethylhexyl)phthalate (DEHP), Nickel Compounds, chemicals listed under California Proposition 65. See www.P65Warnings.ca.gov.
What's Included
Sold separately: 1.5" lavatory drain with overflow.
Installation & Care
Installation
This handmade sink is designed to be undermounted. Nantucket calls for professional installation. Because every hand-made basin is unique, no template is provided: the installer traces the actual rim, and for an undermount subtracts 1/8" from the traced outline (adding 1/4" where an overhang is wanted). Mounting hardware, template and silicone are not included, and silicone should be kept off the bowl, where it can damage the finish. Wax the finish before first use. A small rim bend from shipping can be flattened with a rubber mallet over a towel. There are no faucet holes, so the faucet mounts on the countertop or the wall. The 1.5" center drain opening takes a standard lavatory drain with overflow, sold separately.
Care
Unlacquered brass needs a little routine care. Seal it with a good carnauba paste wax before first use and again every 6 months. Wash daily with a soft damp cloth and a little mild soap free of antibacterial or bleach additives (original Dawn is the brand's example), then rinse and hand dry; never use steel wool, a scouring pad or a sponge. Remove mineral deposits and water spots with Bar Keepers Friend or Brasso. Face cleansers, toothpaste, grooming products, wine, fruit acid and ketchup alter the finish, so rinse them off promptly.
Resources
Shipping, Returns & Warranty
Nantucket Sinks ships this item by UPS or FedEx from North Kingstown, Rhode Island, usually within 1 to 2 business days of your order. Shipping is free within the lower 48 states on orders of $101 or more (orders under $101 ship for a flat $15); for Alaska or Hawaii, contact us before you order. You'll get tracking by email as soon as it ships.
Inspect the packaging and the product before you sign. Note any damage or shortage on the delivery receipt, then email photos to support@mycleansupplies.com within 48 hours of delivery so the freight claim can be filed. Damage reported after 48 hours can't be claimed.
Unused Nantucket Sinks products in their original packaging can be returned within 21 days of delivery. Ask us for a return authorization before you ship. Returns carry Nantucket Sinks' 25% restocking fee, you pay the return shipping, and the return travels at your risk, so pack it as it arrived. Payment processing fees are not refunded. Installed, used or damaged products, and discontinued models, can't be returned.
Nantucket Sinks backs its brass and copper sinks with a limited lifetime warranty: it replaces, at its option, any sink found to have a material defect. All metals patina, so the finish is not covered; follow Nantucket's care guidance to keep it. The warranty covers residential installations for the original purchaser; installation, labor and transportation costs, and damage from installation, improper cleaning, misuse or neglect, are not covered.
Warranty claims. Email Nantucket Sinks at info@nantucketsinksusa.com with the date and place of purchase and installation, the model number, a description of the defect and photos of it. Nantucket Sinks may inspect the product and the installation before it decides on a replacement or adjustment. Contact us with your order number if you would like help with the claim.
About Nantucket Sinks
Nantucket Sinks is a boutique sink maker based in North Kingstown, Rhode Island, that has designed kitchen and bath sinks for more than two decades. Its range of over 500 products brings together fireclay, stainless steel, granite composite, vitreous china, cast iron and hand-hammered metals sourced from skilled makers in Italy, China and beyond, styled with the charm of the New England coast.
Brightwork is Nantucket Sinks' collection of handcrafted metal sinks, hand hammered in brass, copper and stainless steel. Because every sink is shaped by hand, no two are identical and nominal measurements can differ slightly from piece to piece. The range runs from small round and square bar sinks to rectangular and trough-style bathroom sinks, and unlacquered pieces develop a natural patina that Nantucket treats as part of the character of the metal, not a defect.
